55.2-59 Looking for new shocks. Do I still need these? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Phungki · 07-15-2019, 10:11 PM

So I’m looking for new shocks. Probably some Monroe shocks. Always had good luck with them and the price is good. But my question is will I still need to use those rubber pieces? Mine are chewed up and dried out and I haven’t come across them when I’ve been looking for other parts.
Posted via Mobile Device

mr48chev · 07-15-2019, 10:29 PM

New ones hopefully come with them or a pressed in bushing. That style of bushing should be in the box with the shocks if the shocks need them though.

1project2many · 07-16-2019, 06:50 AM

Those bushings are available aftermarket as well. I have replaced mine twice while retaining the shocks.

DransportGarage · 07-17-2019, 05:34 AM

NAPA has them. I searched "shock bushing" for a '55 3100, on their site and found this. They say they're just for the front. Your mileage may vary.

https://www.napaonline.com/en/search...Qualified=true

They're proud of 'em. A nickel part for only $3.69.

1project2many · 07-17-2019, 07:19 AM

They're also available through Dorman / Help line. I can't remember the part number but they were in stock at Advance Auto.

57tailgater · 07-17-2019, 11:06 AM

Also available thru Rock Auto but still over $3.00 ea. plus shipping. I'd see what the shocks come with first.

_Ogre · 07-17-2019, 12:16 PM

they come with new shocks, no need to buy them

Phungki · 07-19-2019, 07:41 PM

Quote:

Originally Posted by _Ogre

they come with new shocks, no need to buy them

Ok. Thank you. I don’t see them in the pictures or listed in any descriptions so I wondered if they were even needed anymore
Posted via Mobile Device

_Ogre · 07-21-2019, 02:04 PM

tf trucks take this type shock front and rear, they come with rubber on them
if you've modified your truck height, download the monroe catalog to see all the options available
jack the truck up to see the extended length and then figure the lower height by figuring out the bumpstop height
then look at the monroe catalog to see what shock you need
i flipped my axle on stock springs with stock brackets, found my shocks this way

Phungki · 07-21-2019, 05:14 PM

Quote:

Originally Posted by _Ogre

tf trucks take this type shock front and rear, they come with rubber on them
if you've modified your truck height, download the monroe catalog to see all the options available
jack the truck up to see the extended length and then figure the lower height by figuring out the bumpstop height
then look at the monroe catalog to see what shock you need
i flipped my axle on stock springs with stock brackets, found my shocks this way

Ok thank you. I didn’t change my height. Kept it stock except changing the rearend to a limited slip out of a 76 trans am. Which isn’t changing the height any

07-15-2019, 10:11 PM	#1
Phungki Registered User Join Date: Sep 2018 Location: Blissfield MI Posts: 252	Looking for new shocks. Do I still need these? So I’m looking for new shocks. Probably some Monroe shocks. Always had good luck with them and the price is good. But my question is will I still need to use those rubber pieces? Mine are chewed up and dried out and I haven’t come across them when I’ve been looking for other parts. Posted via Mobile Device Attached Images

07-15-2019, 10:29 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,389	Re: Looking for new shocks. Do I still need these? New ones hopefully come with them or a pressed in bushing. That style of bushing should be in the box with the shocks if the shocks need them though. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

07-16-2019, 06:50 AM	#3
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,165	Re: Looking for new shocks. Do I still need these? Those bushings are available aftermarket as well. I have replaced mine twice while retaining the shocks.

07-17-2019, 05:34 AM	#4
DransportGarage Registered User Join Date: Feb 2010 Location: Lebanon, Ohio Posts: 1,359	Re: Looking for new shocks. Do I still need these? NAPA has them. I searched "shock bushing" for a '55 3100, on their site and found this. They say they're just for the front. Your mileage may vary. https://www.napaonline.com/en/search...Qualified=true They're proud of 'em. A nickel part for only $3.69. __________________ Bob "It won't take long and it won't cost much." '55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed) Bob's Retirement Build - My 55 TF Bob's 700R4 Build (how-to)

07-17-2019, 07:19 AM	#5
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,165	Re: Looking for new shocks. Do I still need these? They're also available through Dorman / Help line. I can't remember the part number but they were in stock at Advance Auto.

07-17-2019, 11:06 AM	#6
57tailgater Registered User Join Date: Nov 2011 Location: Middle Georgia Posts: 290	Re: Looking for new shocks. Do I still need these? Also available thru Rock Auto but still over $3.00 ea. plus shipping. I'd see what the shocks come with first.

07-17-2019, 12:16 PM	#7
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,677	Re: Looking for new shocks. Do I still need these? they come with new shocks, no need to buy them __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

07-21-2019, 02:04 PM	#9
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,677	Re: Looking for new shocks. Do I still need these? tf trucks take this type shock front and rear, they come with rubber on them if you've modified your truck height, download the monroe catalog to see all the options available jack the truck up to see the extended length and then figure the lower height by figuring out the bumpstop height then look at the monroe catalog to see what shock you need i flipped my axle on stock springs with stock brackets, found my shocks this way __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.