Thanks Rob! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 07-12-2019, 06:10 AM

I got my replacement LED tail lights from Rob this week. Man they are bright!
I shouldn't have anybody saying they can't see them now during the day.
This past June on the Hot Rod Power Tour I had several people say they couldn't see my tail lights during the day time. A specially in the rain! Not any more I hope these things are twice as bright as the last set.

Andy4639 · 07-12-2019, 06:14 AM

The new ones are much brighter than these. I'll get some better pictures of it outside later this weekend I hope if the weather coperates.

Astro-Balls · 07-12-2019, 11:15 AM

Did you have to change the blinker relay with the LED's?

Barnfind46 · 07-12-2019, 01:35 PM

Those look nice,Andy. My wife is worried about people not seeing my brake lights so I may have to go with those.

Andy4639 · 07-13-2019, 12:18 PM

Quote:

Originally Posted by Astro-Balls

Did you have to change the blinker relay with the LED's?

I've had LED's for several years now. I put the blinkers in back then but yes I have both blinkers with the ground straps.

un4gvn! · 07-14-2019, 03:18 AM

I see you have a cargo light. Get the third brake light. It works great and you still have a cargo light.

Andy4639 · 07-14-2019, 09:03 AM

Quote:

Originally Posted by un4gvn!

I see you have a cargo light. Get the third brake light. It works great and you still have a cargo light.

I have the third brake light on the bed cover. I need to raise it up some though. If your in a small vehicle behind me you can't see it.

Robznob11 · 07-18-2019, 02:30 PM

Quote:

Originally Posted by Andy4639

I got my replacement LED tail lights from Rob this week. Man they are bright!
I shouldn't have anybody saying they can't see them now during the day.
This past June on the Hot Rod Power Tour I had several people say they couldn't see my tail lights during the day time. A specially in the rain! Not any more I hope these things are twice as bright as the last set.

Glad you like them sir! I try to tell folks the pictures just don't do them justice! I really try and make a product that is better than the normal off the shelf stuff that vendors offer.

Robznob11 · 07-18-2019, 02:31 PM

Quote:

Originally Posted by Astro-Balls

Did you have to change the blinker relay with the LED's?

If you have stock turn signals with bulbs up front. You can use these with a stock flasher

Robznob11 · 07-18-2019, 02:34 PM

Quote:

Originally Posted by un4gvn!

I see you have a cargo light. Get the third brake light. It works great and you still have a cargo light.

I also make combo panels with red and white for the cargo/brake option. Hartrod is running one on his burb.

Andy4639 · 07-18-2019, 11:05 PM

Rob thanks sir! I'll be getting a 3 brake cargo light from you soon.

**special-K** · 07-19-2019, 08:22 PM

Rob, do you do GMC front park/blinkers?

Robznob11 · 07-21-2019, 06:29 PM

Quote:

Originally Posted by special-K

Rob, do you do GMC front park/blinkers?

I have done a couple sets. So yes i can but tbh they are about the same size and take the same amount of parts to build as tails. Infact they are a touch more complicated. With that said I charge the same $175 shipped for a set. I would also want to barrow 1 lense to ensure proper fit. I dont keep one because i typically don't build them. With that being said they are bright. I use amber leds in them

**special-K** · 07-22-2019, 07:58 AM

Thanks. I'll keep this in mind. I could leave you a spare no problem

Robznob11 · 07-22-2019, 08:05 AM

Lol, its not that i dont want to do them ...just most people think thats high for turn signals. I dont guess i blame them...but when it takes a day or 2 to make them + parts it would not be beneficial for me to give them away. I do try and make all of my leds better than the run of the mill stuff you find on fleabay though. I go for quality parts, durability, and brighter��

Andy4639 · 07-22-2019, 08:17 AM

Quote:

Originally Posted by Robznob11

Lol, its not that i dont want to do them ...just most people think thats high for turn signals. I dont guess i blame them...but when it takes a day or 2 to make them + parts it would not be beneficial for me to give them away. I do try and make all of my leds better than the run of the mill stuff you dind on fleabay though. I go for quality parts, durability, and brighter🤟

Quality parts and craftsmanship cost money! It's worth it Tim.

Daaaanz67 · 07-22-2019, 01:40 PM

Can you post a picture of it not installed? Does it just just plug into the bulb socket? Andy did you have to do anything to make it work with your cruise control since your running the LS? I’ve read that LED will cause the cruise not to work. My truck has DBW.

Robznob11 · 07-22-2019, 01:54 PM

Quote:

Originally Posted by Daaaanz67

Can you post a picture of it not installed? Does it just just plug into the bulb socket? Andy did you have to do anything to make it work with your cruise control since your running the LS? I’ve read that LED will cause the cruise not to work. My truck has DBW.

The tail lights plug into the socket. If you have leds both front and rear with an ls swap, yes you will have to add a load resistor to the circuit for the cruise to function. The computer needs to see a load, you could also maybe get away with a socket wired into the system with a regular bulb (hidden) if you dont like the idea of load resistors

Andy4639 · 07-22-2019, 09:30 PM

Quote:

Originally Posted by Daaaanz67

Can you post a picture of it not installed? Does it just just plug into the bulb socket? Andy did you have to do anything to make it work with your cruise control since your running the LS? I’ve read that LED will cause the cruise not to work. My truck has DBW.

When LSnova1 did mine he added the small relay for the LED's.

07-12-2019, 06:10 AM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Thanks Rob! I got my replacement LED tail lights from Rob this week. Man they are bright! I shouldn't have anybody saying they can't see them now during the day. This past June on the Hot Rod Power Tour I had several people say they couldn't see my tail lights during the day time. A specially in the rain! Not any more I hope these things are twice as bright as the last set. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-12-2019, 06:14 AM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Thanks Rob! The new ones are much brighter than these. I'll get some better pictures of it outside later this weekend I hope if the weather coperates. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-12-2019, 11:15 AM	#3
Astro-Balls Registered User Join Date: Feb 2019 Location: Nor Cal Posts: 822	Re: Thanks Rob! Did you have to change the blinker relay with the LED's? __________________ 1968 C20 Fleetside 396 4sp PS PB AC CST . https://www.youtube.com/watch?v=RWK8GgWD4uA

07-12-2019, 01:35 PM	#4
Barnfind46 Registered User Join Date: Aug 2014 Location: Mena,Arkansas Posts: 485	Re: Thanks Rob! Those look nice,Andy. My wife is worried about people not seeing my brake lights so I may have to go with those. __________________ 68' with no bells or whistles unless I add'em.

07-14-2019, 03:18 AM	#6
un4gvn! Registered User Join Date: Mar 2006 Location: Latrobe, Pa. 15650 Posts: 351	Re: Thanks Rob! I see you have a cargo light. Get the third brake light. It works great and you still have a cargo light.

07-18-2019, 11:05 PM	#11
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Thanks Rob! Rob thanks sir! I'll be getting a 3 brake cargo light from you soon. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-19-2019, 08:22 PM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Thanks Rob! Rob, do you do GMC front park/blinkers? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-22-2019, 07:58 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Thanks Rob! Thanks. I'll keep this in mind. I could leave you a spare no problem __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-22-2019, 08:05 AM	#15
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: Thanks Rob! Lol, its not that i dont want to do them ...just most people think thats high for turn signals. I dont guess i blame them...but when it takes a day or 2 to make them + parts it would not be beneficial for me to give them away. I do try and make all of my leds better than the run of the mill stuff you find on fleabay though. I go for quality parts, durability, and brighter�� __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS Last edited by Robznob11; 07-22-2019 at 08:34 AM.

07-22-2019, 01:40 PM	#17
Daaaanz67 Registered User Join Date: Nov 2011 Location: Idaho Posts: 857	Re: Thanks Rob! Can you post a picture of it not installed? Does it just just plug into the bulb socket? Andy did you have to do anything to make it work with your cruise control since your running the LS? I’ve read that LED will cause the cruise not to work. My truck has DBW.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.