Problem with upper ebrake cable anchoring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 07-25-2019, 11:38 AM

Recently installed all new brake cables in my 65 c10. All works good except the upper cable will not anchor securely in the clamp that holds it just below the pull handle. No matter how much I tighten the bolt, it slips through when I pull on the handle. The rubber coating is getting shreaded from slipping in the clamp.

Has anyone run into this issue & found a solution?

Any info, suggestions, or help is greatly appreciated.

Thanks

**Clyde65** · 07-25-2019, 05:46 PM

I had that same problem several years ago, mine broke so I tried about 4 or 5 new rep pops....nothing worked, so I found an nOS on eBay and paid way to much but it worked! Oh, I also changed from the 65 to 66 ebrake setup also.

**ScottH** · 07-25-2019, 11:44 PM

thanks clyde, appreciate the info

rvrfoot · 07-26-2019, 07:05 PM

My 66c10 was a long bed. When I cut it the kit came with a new cable.

07-25-2019, 11:38 AM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Problem with upper ebrake cable anchoring Recently installed all new brake cables in my 65 c10. All works good except the upper cable will not anchor securely in the clamp that holds it just below the pull handle. No matter how much I tighten the bolt, it slips through when I pull on the handle. The rubber coating is getting shreaded from slipping in the clamp. Has anyone run into this issue & found a solution? Any info, suggestions, or help is greatly appreciated. Thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

07-25-2019, 05:46 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: Problem with upper ebrake cable anchoring I had that same problem several years ago, mine broke so I tried about 4 or 5 new rep pops....nothing worked, so I found an nOS on eBay and paid way to much but it worked! Oh, I also changed from the 65 to 66 ebrake setup also. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

07-25-2019, 11:44 PM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Problem with upper ebrake cable anchoring thanks clyde, appreciate the info __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

07-26-2019, 07:05 PM	#4
rvrfoot Registered User Join Date: Oct 2016 Location: san bernardino ca Posts: 1,611	Re: Problem with upper ebrake cable anchoring My 66c10 was a long bed. When I cut it the kit came with a new cable.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.