WA 1968 gmc, c30, Parting out, - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 07-16-2019, 02:20 AM

Im getting ready to scrap this in the next couple of days, pretty nice nose, no grill, $450 local or you arrange fastenal shipping.
Driver quality doors, $100ea, local or you arrange fastenal shipping, repairable lower rust.
Anything else just ask, i also have parts available from other trucks too.

54Caddy · 07-16-2019, 02:33 AM

Still have the tilt bench seat? I need the bolts that the back bolts onto the lower frame. They have a large shoulder on them for it to pivot. Also how’s the hood moulding?

*randy500* · 07-16-2019, 02:39 AM

Quote:

Originally Posted by 54Caddy

Still have the tilt bench seat? I need the bolts that the back bolts onto the lower frame. They have a large shoulder on them for it to pivot. Also how’s the hood moulding?

I sold the complete seat.
Im keeping the hood molding with the nose.

Madkidd007 · 07-16-2019, 04:45 AM

What’s the deal on all the rear ends I see? The floater to the left looks to have pretty wide hubs, it an Eaton? And before you scrap it I would like to have you cut the radio out of the dash, gonna do something on my crew so I don’t need a dash repair panel just the radio recessed area.
Any of those axles have posi or lockers? Also depending on the inner rockers I could use some cuts to help with my rear floor.

*randy500* · 07-16-2019, 11:09 AM

Quote:

Originally Posted by Madkidd007

What’s the deal on all the rear ends I see? The floater to the left looks to have pretty wide hubs, it an Eaton? And before you scrap it I would like to have you cut the radio out of the dash, gonna do something on my crew so I don’t need a dash repair panel just the radio recessed area.
Any of those axles have posi or lockers? Also depending on the inner rockers I could use some cuts to help with my rear floor.

Those are all square body rears, no lockers.
I will cut the radio out for you.
For the rear of the crew use front outer floors, cut to fit. I had a piece sitting outside i will look for it, it came off one i cut up for my rear floor repair.

Madkidd007 · 07-16-2019, 12:55 PM

Quote:

Originally Posted by randy500

Those are all square body rears, no lockers.
I will cut the radio out for you.
For the rear of the crew use front outer floors, cut to fit. I had a piece sitting outside i will look for it, it came off one i cut up for my rear floor repair.

You know exactly what I have in mind, was actually looking at the repair panels right before I came across this. You got my number, I have the pieces you need also when you get time we can get that figured out

mrslinky · 07-16-2019, 01:14 PM

looking for the rear leaf spring hangers shipped to 54494

mrslinky · 07-16-2019, 01:15 PM

also can you get some pictures of them for me too?

Graham57a · 07-16-2019, 03:39 PM

Willing to cut up the cab? I need a floor patch underneath the gas pedal

Madkidd007 · 07-16-2019, 04:35 PM

Randy I’m about to put myself into debt with this one. I would like one of the crossmember also. Doesn’t really matter which one as I’m just gonna use the flat part. Could use a carrier support bearing bolt also if it has the correct ones with the cotter key. Call me later if you can

**Eagle9502** · 07-16-2019, 07:41 PM

Interested in front fenders depending on condition when you get them off.

*randy500* · 07-16-2019, 09:24 PM

Quote:

Originally Posted by Graham57a

Willing to cut up the cab? I need a floor patch underneath the gas pedal

Can you post a pic of what you need?

Graham57a · 07-17-2019, 01:49 PM

Quote:

Originally Posted by randy500

Can you post a pic of what you need?

Floor board underneath the gas pedal about 12" by 12" starting at the pinch weld and the corner of the trans tunnel.

*randy500* · 07-17-2019, 02:57 PM

Quote:

Originally Posted by Graham57a

Floor board underneath the gas pedal about 12" by 12" starting at the pinch weld and the corner of the trans tunnel.

Ok i will check.

**D.PASSMORE** · 07-17-2019, 04:49 PM

Upper rear shock mounts?

*randy500* · 07-17-2019, 05:00 PM

Quote:

Originally Posted by D.PASSMORE

Upper rear shock mounts?

No rear shocks or mounts, i guess some of these early trucks didnt come with rear shocks.

Onry69CST · 07-17-2019, 10:49 PM

Dash pad shipped to 44234? Other than a few cracks above the radio, see any more issues?

Noah96 · 07-18-2019, 05:22 PM

How does the bottom of the drivers door look?

olblue60@aol.com · 07-19-2019, 01:17 PM

Is the Glovebox door, the non metallic Dk.green? Is it in good condition? Interested.

John

joe70 · 07-22-2019, 10:32 AM

looking for carrier bearing support brackrt,i have chevy with leaf springs not coils.here is a picture of what i need the top one in the image.

Joe

joe70 · 07-22-2019, 10:36 AM

here is the image

Joe

Madkidd007 · 07-22-2019, 09:48 PM

Quote:

Originally Posted by joe70

here is the image

Joe

Can’t speak for randy but I believe all the 157” and longer wheelbase trucks were different

67c20camper · 07-29-2019, 01:57 PM

Do you have a clutch pedal assembly available?

*randy500* · 07-29-2019, 02:18 PM

Quote:

Originally Posted by 67c20camper

Do you have a clutch pedal assembly available?

No it was automatic

Onry69CST · 07-29-2019, 06:05 PM

If you still have the dash pad I'm still interrested if shipping isn't a killer.

07-16-2019, 02:20 AM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	1968 gmc, c30, Parting out, Im getting ready to scrap this in the next couple of days, pretty nice nose, no grill, $450 local or you arrange fastenal shipping. Driver quality doors, $100ea, local or you arrange fastenal shipping, repairable lower rust. Anything else just ask, i also have parts available from other trucks too. Attached Images

07-16-2019, 02:33 AM	#2
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: 1968 gmc, c30, Parting out, Still have the tilt bench seat? I need the bolts that the back bolts onto the lower frame. They have a large shoulder on them for it to pivot. Also how’s the hood moulding? __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

07-16-2019, 04:45 AM	#4
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,234	Re: 1968 gmc, c30, Parting out, What’s the deal on all the rear ends I see? The floater to the left looks to have pretty wide hubs, it an Eaton? And before you scrap it I would like to have you cut the radio out of the dash, gonna do something on my crew so I don’t need a dash repair panel just the radio recessed area. Any of those axles have posi or lockers? Also depending on the inner rockers I could use some cuts to help with my rear floor. __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

07-16-2019, 01:14 PM	#7
mrslinky Registered User Join Date: May 2012 Location: Wisconsin Posts: 4	Re: 1968 gmc, c30, Parting out, looking for the rear leaf spring hangers shipped to 54494

07-16-2019, 01:15 PM	#8
mrslinky Registered User Join Date: May 2012 Location: Wisconsin Posts: 4	Re: 1968 gmc, c30, Parting out, also can you get some pictures of them for me too?

07-16-2019, 03:39 PM	#9
Graham57a Registered User Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,839	Re: 1968 gmc, c30, Parting out, Willing to cut up the cab? I need a floor patch underneath the gas pedal __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788 1972 Chevy SWB Highlander OLIVE Build thread coming

07-16-2019, 04:35 PM	#10
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,234	Re: 1968 gmc, c30, Parting out, Randy I’m about to put myself into debt with this one. I would like one of the crossmember also. Doesn’t really matter which one as I’m just gonna use the flat part. Could use a carrier support bearing bolt also if it has the correct ones with the cotter key. Call me later if you can __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

07-16-2019, 07:41 PM	#11
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 830	Re: 1968 gmc, c30, Parting out, Interested in front fenders depending on condition when you get them off.

07-17-2019, 04:49 PM	#15
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: 1968 gmc, c30, Parting out, Upper rear shock mounts? __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

07-17-2019, 10:49 PM	#17
Onry69CST Registered User Join Date: Jan 2019 Location: Mantua Ohio Posts: 190	Re: 1968 gmc, c30, Parting out, Dash pad shipped to 44234? Other than a few cracks above the radio, see any more issues?

07-18-2019, 05:22 PM	#18
Noah96 Registered User Join Date: Aug 2016 Location: Danville Wv Posts: 266	Re: 1968 gmc, c30, Parting out, How does the bottom of the drivers door look?

07-19-2019, 01:17 PM	#19
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: 1968 gmc, c30, Parting out, Is the Glovebox door, the non metallic Dk.green? Is it in good condition? Interested. John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

07-22-2019, 10:32 AM	#20
joe70 Registered User Join Date: May 2001 Location: saint peters,mo,usa Posts: 42	Re: 1968 gmc, c30, Parting out, looking for carrier bearing support brackrt,i have chevy with leaf springs not coils.here is a picture of what i need the top one in the image. Joe

07-22-2019, 10:36 AM	#21
joe70 Registered User Join Date: May 2001 Location: saint peters,mo,usa Posts: 42	Re: 1968 gmc, c30, Parting out, here is the image Joe Attached Images

07-29-2019, 01:57 PM	#23
67c20camper Registered User Join Date: Jan 2016 Location: Denver, CO Posts: 4	Re: 1968 gmc, c30, Parting out, Do you have a clutch pedal assembly available?



Register or Log In To remove these advertisements.

07-29-2019, 06:05 PM	#25
Onry69CST Registered User Join Date: Jan 2019 Location: Mantua Ohio Posts: 190	Re: 1968 gmc, c30, Parting out, If you still have the dash pad I'm still interrested if shipping isn't a killer.

Register or Log In To remove these advertisements.