The other guy 1967-72 c50 axle swap

[Drewbee]

Pvmt Pndr

Thanks!

I dont have the frame.

If the springs on the frame are 32" centers then a dana 60 should be able to bolt in. Seeing as the cab is the same whether it's c10 through c70, I bet the leaf springs end up the same distance apart as the 1/2 ton and 3/4 ton trucks.

I understand this is arse backwards as I'd be putting 1 ton axles on a 2 ton truck, most sane people probably dont do this.

However spending a few thousand for a running c50 without seeing if someone else knows is too rich for my blood.