Anyone use LMC's Brake Line Package? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blkcorvair · 08-19-2011, 02:15 PM

I know this has been a popular dicussion lately, But I am ordering a $1000 of parts from LMC tht qualifies for free freight. I need a Brake line kit and wondered if LMC's brake line kit is any good? Since Im getting free freight and the brake line kits ship oversize I figured it'd be a good time to get one.

FLcustom10 · 08-19-2011, 03:09 PM

I ordered the stainless steel brake lines from LMC. They fit fine going to the rear. The front did not conform to the cross member quite as well as the originals and I had to work with it a bit, but everything hooked up fine. I haven't actually driven it yet.

FLcustom10 · 08-19-2011, 04:19 PM

Here are some pics:

blkcorvair · 08-19-2011, 06:14 PM

Thanks fpor those pics!

gcburdic · 08-20-2011, 03:14 PM

I think they are drop shipped from inlinetube.com....just an FYI

blkcorvair · 08-20-2011, 03:39 PM

lol.

CE20934 · 08-20-2011, 05:24 PM

Quote:

Originally Posted by gcburdic

I think they are drop shipped from inlinetube.com....just an FYI

Yep. I ordered the SS set for my C20 in '99, and Inline Tube was the return address. I felt like a fool for ordering something from KS that was both made in and shipped from MI. I could've driven down there to pick it up!

Side note: The kit worked great except for the rear end. The box had the lines for a 1/2-ton 10-bolt instead of a 3/4-ton Eaton. When I called LMC, they said, "If that's what came, then that's what's in the kit."

I installed steel lines back there until I could call Inline Tube...which I still haven't done. Probably should get on that.

1968SWBBigBlock · 08-20-2011, 07:37 PM

Whats worse is that Inline buys this kit from Right Stuff

Talk about walking the long way around the block!
I have the full stainless kit on my truck - fwiw I would not run SST lines again - way to hard to get to seal - the amount of torque it takes to crush the line for a good seal is alot - They do look nice

kingsolver72 · 08-20-2011, 08:23 PM

I bought the ss lines from them a couple years ago.They fit well on a frame off project truck that is now gone. Actually just bought steele lines from them a few days ago for my ochre truck.Fit was excellent...I rebuilt the whole system.Just got the prebent lines from LMC.I work in KC some and easy access for me.
I've bought tons of stuff from them..never had problems so far.I heard some others aren't so fortunate.

pat 70/71 · 08-20-2011, 10:11 PM

I bought the stainless kit for my 71 sbfs, little bit of work at the front as stated, but overall I'm real pleased with everything else fit wise it was very close. cheers, Pat

kell490 · 08-01-2019, 12:32 AM

LMC is nothing more then a drop shipper from same suppliers you can go to they charge you double what you can buy it for directly. I figured that out on a wire harness they used american autowire price was double what buying it directly from American Autowire. I also bought the brake line kit it's from inlinetube.com at double the price. I know this is an old thread just so new people don't get screwed by LMC. That's why their catalog doesn't show you the manufacture of the part. They make it easy to find everything but body panels I got from LMC none fit correctly.

08-19-2011, 02:15 PM	#1
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 787	Anyone use LMC's Brake Line Package? I know this has been a popular dicussion lately, But I am ordering a $1000 of parts from LMC tht qualifies for free freight. I need a Brake line kit and wondered if LMC's brake line kit is any good? Since Im getting free freight and the brake line kits ship oversize I figured it'd be a good time to get one.

08-19-2011, 03:09 PM	#2
FLcustom10 Registered User Join Date: Feb 2007 Location: Tallahassee, FL Posts: 322	Re: Anyone use LMC's Brake Line Package? I ordered the stainless steel brake lines from LMC. They fit fine going to the rear. The front did not conform to the cross member quite as well as the originals and I had to work with it a bit, but everything hooked up fine. I haven't actually driven it yet.

08-19-2011, 04:19 PM	#3
FLcustom10 Registered User Join Date: Feb 2007 Location: Tallahassee, FL Posts: 322	Re: Anyone use LMC's Brake Line Package? Here are some pics: Attached Images

08-19-2011, 06:14 PM	#4
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 787	Re: Anyone use LMC's Brake Line Package? Thanks fpor those pics!

08-20-2011, 03:14 PM	#5
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Anyone use LMC's Brake Line Package? I think they are drop shipped from inlinetube.com....just an FYI __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

08-20-2011, 03:39 PM	#6
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 787	Re: Anyone use LMC's Brake Line Package? lol.

08-20-2011, 07:37 PM	#8
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Anyone use LMC's Brake Line Package? Whats worse is that Inline buys this kit from Right Stuff Talk about walking the long way around the block! I have the full stainless kit on my truck - fwiw I would not run SST lines again - way to hard to get to seal - the amount of torque it takes to crush the line for a good seal is alot - They do look nice __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

08-20-2011, 08:23 PM	#9
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,207	Re: Anyone use LMC's Brake Line Package? I bought the ss lines from them a couple years ago.They fit well on a frame off project truck that is now gone. Actually just bought steele lines from them a few days ago for my ochre truck.Fit was excellent...I rebuilt the whole system.Just got the prebent lines from LMC.I work in KC some and easy access for me. I've bought tons of stuff from them..never had problems so far.I heard some others aren't so fortunate. __________________ Fight the good fight, finish the race, keep the faith

08-20-2011, 10:11 PM	#10
pat 70/71 Registered User Join Date: Nov 2009 Location: newbury park california Posts: 1,038	Re: Anyone use LMC's Brake Line Package? I bought the stainless kit for my 71 sbfs, little bit of work at the front as stated, but overall I'm real pleased with everything else fit wise it was very close. cheers, Pat

08-01-2019, 12:32 AM	#11
kell490 Registered User Join Date: Aug 2004 Location: phoenix az Posts: 105	Re: Anyone use LMC's Brake Line Package? LMC is nothing more then a drop shipper from same suppliers you can go to they charge you double what you can buy it for directly. I figured that out on a wire harness they used american autowire price was double what buying it directly from American Autowire. I also bought the brake line kit it's from inlinetube.com at double the price. I know this is an old thread just so new people don't get screwed by LMC. That's why their catalog doesn't show you the manufacture of the part. They make it easy to find everything but body panels I got from LMC none fit correctly.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.