1980 Fan Shroud W/AC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mixup · 07-16-2019, 05:35 PM

Anybody know where to get a fan shroud for a 1980 Chevy Pickup V8 with AC? Can't find one listed anywhere.

Pontiac1976 · 07-22-2019, 10:30 AM

Did you check them out here

Pontiac1976 · 07-22-2019, 10:45 AM

If not then your going to have to try wrecking yard that has lots truck of the 73-80.
I think you need the top section mostly. I be leave the bottom is the same in one of the
option or will work with the top. I have to see them as I do not remember any more It's been along time I checked that out. If it the None a/c or the a/c option can work.

Dannyboy1966 · 07-22-2019, 11:19 AM

Quote:

Originally Posted by Pontiac1976

Did you check them out here

I believe the only difference between the two are the one for AC has two towers molded in the top so you can clamp the lines to the top of it.
Posted via Mobile Device

82Diesel · 07-22-2019, 10:48 PM

Good thing you don't need one for a 6.2L diesel they are almost impossible to find! I don't know much on Gas Specific parts though! Best luck Maybe some Aftermarket websites, like LMC/USA1/Classic Industries etc... or Yes the local Wreaking yard.

Mixup · 08-07-2019, 08:46 PM

Called LMC, they don't have one and they don't know of anybody that does. The A/C radiator is taller and the non A/C is shorter.

07-16-2019, 05:35 PM	#1
Mixup Registered User Join Date: Jan 2002 Location: Henderson, NV Posts: 358	1980 Fan Shroud W/AC Anybody know where to get a fan shroud for a 1980 Chevy Pickup V8 with AC? Can't find one listed anywhere. __________________ 1980 Chevy Shortbed Pickup 1969 Z28 engine Turbo 350

07-22-2019, 10:30 AM	#2
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 766	Re: 1980 Fan Shroud W/AC Did you check them out here __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

07-22-2019, 10:45 AM	#3
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 766	Re: 1980 Fan Shroud W/AC If not then your going to have to try wrecking yard that has lots truck of the 73-80. I think you need the top section mostly. I be leave the bottom is the same in one of the option or will work with the top. I have to see them as I do not remember any more It's been along time I checked that out. If it the None a/c or the a/c option can work. __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

07-22-2019, 10:48 PM	#5
82Diesel Registered User Join Date: Jun 2017 Location: USA Posts: 220	Re: 1980 Fan Shroud W/AC Good thing you don't need one for a 6.2L diesel they are almost impossible to find! I don't know much on Gas Specific parts though! Best luck Maybe some Aftermarket websites, like LMC/USA1/Classic Industries etc... or Yes the local Wreaking yard.

08-07-2019, 08:46 PM	#6
Mixup Registered User Join Date: Jan 2002 Location: Henderson, NV Posts: 358	Re: 1980 Fan Shroud W/AC Called LMC, they don't have one and they don't know of anybody that does. The A/C radiator is taller and the non A/C is shorter. __________________ 1980 Chevy Shortbed Pickup 1969 Z28 engine Turbo 350



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.