|
06-06-2004, 08:18 PM
|
#1 |
|
Registered User
Join Date: Dec 2002
Location: Stoney Creek, ON
Posts: 89
|
Cab mount bolt sizes
Does anyone know what size bolts are used for the cab mounts? Are the ones for the front mount the same length as the one's for the rear? Are they fine or course thread? I tried changing out my cab mounts today and of course all of the bolts are seized. I ended up breaking the head off one of them. (That's going to be a treat to get out!) I want to get all of the hardware together before I go at the job again. I just don't want to go to the dealer and pay $15 for a standard grade 8 bolt. Thanks for the help.
Jason |
|
|
|
06-06-2004, 11:03 PM
|
#2 |
|
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
I went to a few dealers around my area. They all said same thing that they didnt have the bolts. But the bolts are 1/2x13x3, you might get lucky and find some at a dealer. If not that is the specs you need for the bolts.
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI |
|
|
|
|
06-07-2004, 09:41 AM
|
#3 |
|
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
I misread that. I went to the dealer in hopes of getting cab mount bolts, they couldn't get any. I ended up getting the bolts from a faster dealer in grade 8 with HD washers and a few nuts all for right around 15.00. Cant remember exactly what the total was but it was pretty cheap I thought.
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
