|
06-06-2004, 05:36 PM
|
#1 |
|
3 lefts make a right
Join Date: Jun 2004
Location: Texas Hill Country
Posts: 150
|
New Guy
Hello boys and girls, I have been checking out the site for the past couple of weeks and there is tons of great information here and I am now proud to be a member. I have a 1980 "Big 10" Silverado that I have had going on a year now. It is my daily driver and I love it. The wife and I also use it to go into the Texas hill country and to the river when we can...the two tanks do come in handy but I hate filling them now! I will leave you with some picks but for now the BBQ is calling...time to light some wood.
The cab shot shows the seats that came with the truck..2001 buckets. I had to take them out...You should not have to duck your head when getting into a truck...plus when in my head was 1 inches from the headliner...I found a bench at a junk yard. Last edited by 80BIG10; 06-06-2004 at 05:40 PM. |
|
|
|
06-06-2004, 05:38 PM
|
#2 |
|
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Wicked, another 80!
 Very very nice truck man! And welcome to the forum! This place is simply awesome, if you need to do something, its almost guaranteed that someone else here are done it already and is willing to help you out
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
|
|
|
|
06-06-2004, 07:23 PM
|
#3 |
|
Happy to be here
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Welcome to the forum 80BIG10. That is one clean 80 you lucked across. If you need any input, don't hesitate to ask....
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
|
|
|
06-06-2004, 09:39 PM
|
#4 |
|
Account Suspended
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,399
|
welcome to our addiction.
|
|
|
|
|
06-06-2004, 10:01 PM
|
#5 |
|
Registered User
Join Date: Oct 2002
Location: Phoenix, Arizona
Posts: 4,703
|
Welcome to the board!
Truck looks nice, do you have carpet or the rubber mat inside? I have been thinking about going to the rubber mat cause I mess carpet up real fast. How high are the seats and are you interested in selling them? Any pictures of the brakcets, maybe someone (  ) can buy the seats from you and make different brackets that allow the seat to sit lower.My seat is pure sh*t. I have to keep putting covers on it and I am missing a bracket on the front passenger side. Only (3) bolts holding my seat in.
__________________
* AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION * Last edited by PHOENIX; 06-06-2004 at 10:04 PM. |
|
|
|
|
06-06-2004, 10:32 PM
|
#6 |
|
Registered User
Join Date: Jan 2003
Location: Washington State
Posts: 8,831
|
Welcome from soggy SW Washington State......
__________________
1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo |
|
|
|
|
06-06-2004, 10:48 PM
|
#7 |
|
3 lefts make a right
Join Date: Jun 2004
Location: Texas Hill Country
Posts: 150
|
Phoenix, I got rid of the seats when I got the bench. When the previous owner installed the buckets he welded them to a 1/4 inch steel plate and then bolted the plate. Even taking the seats off the plate would only drop them 1/4 inch at the most and that just wouldn't have been enough. Those seats have a plastic "skirt" that go all the way around that has to sit on the hump in the middle. I took the truck to a couple diffrent metal shops but the general response was that it wasn't even worth it. I am 5'10 - 5'11 and I would have to duck my head everytime I got into the truck. When sitting in the truck I could extend my neck up and touch my head on the head liner. I found a yard that had a bench and the belts and basicly traded them out. You should have seen them pull out the seats with that metal plate. I don't know what they were going to do with it because the brakets will be tough to save if you try to take it off the plate...they did a heavy duty job welding the seats to that plate.
|
|
|
|
|
06-06-2004, 10:56 PM
|
#8 |
|
Senior Member
Join Date: Apr 2002
Location: Beaverton, OR
Posts: 1,615
|
Welcome to the board. You have got a real nice clean 80!
__________________
Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400 |
|
|
|
|
06-07-2004, 10:48 AM
|
#9 |
|
Registered User
Join Date: Jan 2003
Location: Austin, TX
Posts: 824
|
Welcome aboard from Austin. Nice ride you got there.
|
|
|
|
|
06-07-2004, 11:47 AM
|
#10 |
|
I'm back with 2nd truck!
Join Date: Feb 2002
Location: Texas
Posts: 3,774
|
Glad to see another Big 10 on the board
__________________
1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
