IA WTB TH400 pan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ThreeQuarter** · 08-11-2019, 09:54 PM

Interested in a factory TH400 pan, either 2” or 3”. Needs to be in good condition, minimal dents.

**62cdan** · 08-11-2019, 11:15 PM

Are you only interested in a factory pan?
-Mike

**w314speed** · 08-12-2019, 05:43 AM

I have one of each. I will get them out and post some pics. Thanks, Dan

**70STOVEBOLT** · 08-12-2019, 08:37 AM

I have a stock 2 inch deep pan as well.

**ThreeQuarter** · 08-12-2019, 10:50 AM

Yes, I’m only interested in a factory pan. Any pics and prices would be appreciated.

**70STOVEBOLT** · 08-12-2019, 10:53 AM

Will get pics tonight.

**70STOVEBOLT** · 08-13-2019, 08:16 AM

Couldn't get pics, will try tonight.

**ThreeQuarter** · 08-16-2019, 04:49 PM

ttt

**402Bowtie** · 08-16-2019, 05:21 PM

I have this one with a few small dings. I would like $55 shipped plus fees.

**w314speed** · 08-17-2019, 05:41 AM

I will get pics this weekend. Working bell to bell today!

**70STOVEBOLT** · 08-17-2019, 09:14 AM

Mine is still on the trans I will not have a chance to get it off this weekend

**ThreeQuarter** · 08-17-2019, 11:22 PM

Thanks for the pics, 402Bowtie. I think that’s more dents than I’d like.

**402Bowtie** · 08-17-2019, 11:45 PM

Quote:

Originally Posted by ThreeQuarter

Thanks for the pics, 402Bowtie. I think that’s more dents than I’d like.

Ok understood. No problem!

1972 Jimmy · 08-18-2019, 09:04 AM

I have a very one one for you. Check out the below thread.

http://67-72chevytrucks.com/vboard/s...d.php?t=782583

**w314speed** · 08-18-2019, 07:59 PM

Here are the pis of the TH400 pans I have. Very minor marks on each.

The 2" pan is $50 plus shipping and Paypal fees.

The 3" pan is $75 plus shipping and Paypal fees.

LMK! Thanks, Dan

**ThreeQuarter** · 08-19-2019, 09:17 PM

Thanks, y’all. I bought one.

08-11-2019, 09:54 PM	#1
ThreeQuarter Senior Member Join Date: Jun 2000 Location: Texan in Iowa Posts: 2,522	WTB TH400 pan Interested in a factory TH400 pan, either 2” or 3”. Needs to be in good condition, minimal dents. __________________ Ben '68 Chevy C10 Custom LWB 327/TH400 2nd owner '16 GMC Sierra 1500 SLE Dblcab 4wd 5.3

08-11-2019, 11:15 PM	#2
62cdan Senior Member Join Date: Mar 2016 Location: Belleville, IL Posts: 241	Re: WTB TH400 pan Are you only interested in a factory pan? -Mike __________________ 1964 C-10 SWB Fleetside 6cyl/ Stick 1968 C-10 SWB Fleetside 355/Turbo 400 1970 GMC 5500 Dump Truck 401 V6 1971 K5 Blazer CST 4WD 350/ 350 1971 C-30 Longhorn 350 / 4 Speed 1972 K-10 SWB Fleetside 350/ 4 Speed 1972 GMC SWB Fleetside 6cyl/ Stick 1979 K/10 SWB Fleetside 350/350

08-12-2019, 05:43 AM	#3
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: WTB TH400 pan I have one of each. I will get them out and post some pics. Thanks, Dan

08-12-2019, 08:37 AM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB TH400 pan I have a stock 2 inch deep pan as well. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-12-2019, 10:50 AM	#5
ThreeQuarter Senior Member Join Date: Jun 2000 Location: Texan in Iowa Posts: 2,522	Re: WTB TH400 pan Yes, I’m only interested in a factory pan. Any pics and prices would be appreciated. __________________ Ben '68 Chevy C10 Custom LWB 327/TH400 2nd owner '16 GMC Sierra 1500 SLE Dblcab 4wd 5.3

08-12-2019, 10:53 AM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB TH400 pan Will get pics tonight. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-13-2019, 08:16 AM	#7
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB TH400 pan Couldn't get pics, will try tonight. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-16-2019, 04:49 PM	#8
ThreeQuarter Senior Member Join Date: Jun 2000 Location: Texan in Iowa Posts: 2,522	Re: WTB TH400 pan ttt __________________ Ben '68 Chevy C10 Custom LWB 327/TH400 2nd owner '16 GMC Sierra 1500 SLE Dblcab 4wd 5.3

08-16-2019, 05:21 PM	#9
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Re: WTB TH400 pan I have this one with a few small dings. I would like $55 shipped plus fees. Attached Images

08-17-2019, 05:41 AM	#10
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: WTB TH400 pan I will get pics this weekend. Working bell to bell today!

08-17-2019, 09:14 AM	#11
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB TH400 pan Mine is still on the trans I will not have a chance to get it off this weekend __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-17-2019, 11:22 PM	#12
ThreeQuarter Senior Member Join Date: Jun 2000 Location: Texan in Iowa Posts: 2,522	Re: WTB TH400 pan Thanks for the pics, 402Bowtie. I think that’s more dents than I’d like. __________________ Ben '68 Chevy C10 Custom LWB 327/TH400 2nd owner '16 GMC Sierra 1500 SLE Dblcab 4wd 5.3

08-18-2019, 09:04 AM	#14
1972 Jimmy Registered User Join Date: Nov 2012 Location: Freeland, Michigan Posts: 1,385	Re: WTB TH400 pan I have a very one one for you. Check out the below thread. http://67-72chevytrucks.com/vboard/s...d.php?t=782583

08-18-2019, 07:59 PM	#15
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: WTB TH400 pan Here are the pis of the TH400 pans I have. Very minor marks on each. The 2" pan is $50 plus shipping and Paypal fees. The 3" pan is $75 plus shipping and Paypal fees. LMK! Thanks, Dan Attached Images

08-19-2019, 09:17 PM	#16
ThreeQuarter Senior Member Join Date: Jun 2000 Location: Texan in Iowa Posts: 2,522	Re: WTB TH400 pan Thanks, y’all. I bought one. __________________ Ben '68 Chevy C10 Custom LWB 327/TH400 2nd owner '16 GMC Sierra 1500 SLE Dblcab 4wd 5.3



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.