Fixing body lines on my 70 c10 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dmw319 · 08-16-2019, 10:14 AM

so.. my door still pops. and I don't know what to do short of taking an angle grinder to shave part of it off (its that annoying).

I don't seem to have any room to move the door back towards the cab any further (if you look at this pic: https://savedalone.files.wordpress.c...1/img-6896.jpg

anyone have any ideas?

**Grumpy old man** · 08-16-2019, 10:22 AM

Check your core support mounts . you just may be able to use one shim on the passenger side to lift the fender away from the bottom of the door if the mount is still good . it's not the door it's the fender that's dropped .

**ga-stepside** · 08-16-2019, 11:39 AM

Quote:

Originally Posted by Grumpy old man

Check your core support mounts . you just may be able to use one shim on the passenger side to lift the fender away from the bottom of the door if the mount is still good . it's not the door it's the fender that's dropped .

That is exactly what I had to do.

dmw319 · 08-20-2019, 08:02 AM

thanks! my cab mounts are shot so I'm going to start with replacing those and seeing what happens

Mbeef61 · 08-22-2019, 10:04 PM

Quote:

Originally Posted by dmw319

thanks! my cab mounts are shot so I'm going to start with replacing those and seeing what happens

Do the core supports also

08-16-2019, 10:14 AM	#26
dmw319 Registered User Join Date: May 2012 Location: Raleigh, NC Posts: 639	Re: Fixing body lines on my 70 c10 so.. my door still pops. and I don't know what to do short of taking an angle grinder to shave part of it off (its that annoying). I don't seem to have any room to move the door back towards the cab any further (if you look at this pic: https://savedalone.files.wordpress.c...1/img-6896.jpg anyone have any ideas? __________________ 1970 Chevy C-10 Stepside My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=528167

08-16-2019, 10:22 AM	#27
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Fixing body lines on my 70 c10 Check your core support mounts . you just may be able to use one shim on the passenger side to lift the fender away from the bottom of the door if the mount is still good . it's not the door it's the fender that's dropped . __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

08-20-2019, 08:02 AM	#29
dmw319 Registered User Join Date: May 2012 Location: Raleigh, NC Posts: 639	Re: Fixing body lines on my 70 c10 thanks! my cab mounts are shot so I'm going to start with replacing those and seeing what happens __________________ 1970 Chevy C-10 Stepside My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=528167



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.