|
08-27-2019, 06:26 PM
|
#1 |
|
Registered User
Join Date: Jun 2017
Location: Peoria, Arizona
Posts: 274
|
Need Help
I have the front end apart and don't have the grill in my possession right now. I am putting on a condenser and heat exchanger on the front end, but wanted to know how much space is in front of the core support "X"(basically the front of the core support) and the grill? Anyone have any pics and/or measurements?
Thanks you in advance.
__________________
Current project: 59 Apache with 2012 Corvette drivetrain Jeep Trackhawk(beast) |
|
|
|
08-31-2019, 08:58 AM
|
#2 |
|
Registered User
Join Date: Apr 2011
Location: Virginia Beach, VA
Posts: 514
|
Re: Need Help
If you are adding a condensor and cooler in front of radiator, you will need to cut the "x" brace out. This is what Vintage Air calls for, what I did.
Cheers, Jim |
|
|
|
|
08-31-2019, 10:30 AM
|
#3 |
|
Senior Member
  Join Date: Oct 2014
Location: Eagle, ID
Posts: 3,058
|
Re: Need Help
You don't lose any structural integrity doing this?
|
|
|
|
|
08-31-2019, 11:48 AM
|
#4 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,705
|
Re: Need Help
You do loose structural integrity and gain a few squeaks. There isn't much of an option to do it and leave them though from what I have seen.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
08-31-2019, 04:44 PM
|
#5 |
|
Registered User
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,648
|
Re: Need Help
If the truck originally had a V8 engine where the radiator was farther back from the grill you might be able to do what you want to do, but if it was originally a six, even with the X brace removed I doubt that you could get anything other than the condenser to fit behind the grill. I spaced my X brace out almost an inch to clear my condenser but then had to tweek my spacers slightly because the bottom of my grill hit the X brace. 57 truck BTW.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
