My New Truck

[Factory Guy]

Originally Posted by ShortHaul

Great job on the caps! Did you repaint the black part? I had a hell of a time masking off and painting mine...

Thanks!

Yes I did, first I cleaned the hubcap except for the red GMC trim with Acetone to make sure it is void of any contaminants. Next I scuffed the chrome area to be painted black with a #800 scuff pad. Then I carefully mask off the cap with 1/4" PINSTRIPE tape (goes around circles a lot easier than masking tape). Then I mask of the rest of the cap with BLUE Masking tape (cause it just STICKS better-then the off white stuff). Cleaned the remaining chrome to be black, again with Acetone. Painted the soon to be black areas with a spray paint-SELF ETCHING PRIMER, (2 times light coats). Waited a week and the painted the black strips with Spray can Satin Black Wheel paint (2 coats). Then let dry another week.

I DON"T EVER want to do this again so that's why I am being so particular.

Still got 2 hub caps to go.

Note: it took about 1 to 1 1/2 hours to tape off a single hub cap.

Attached is the hubcap with all of the tape on it waiting for it to dry. (a complete 5 days).