WA Wanted: Smog Pump setup, small block, parts or complete, pictures also needed - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**chewychevy67** · 09-07-2019, 09:16 AM

Here they are. Does 125 shipped work?

*randy500* · 09-07-2019, 11:47 AM

Quote:

Originally Posted by chewychevy67

Here they are. Does 125 shipped work?

Those look pretty good, im on the fence whether i should buy new or used. Let me think about it a bit.

**chewychevy67** · 09-07-2019, 12:53 PM

Ok. These are brand new. Still have most of the black plating on them. Just been sitting on my shelf. Nice threads and no marks on the heads. I was going to use them on my 67 but I aquuired 2.5 ramhorns and I can't use them with the air injection.

*randy500* · 09-07-2019, 01:17 PM

Quote:

Originally Posted by chewychevy67

Ok. These are brand new. Still have most of the black plating on them. Just been sitting on my shelf. Nice threads and no marks on the heads. I was going to use them on my 67 but I aquuired 2.5 ramhorns and I can't use them with the air injection.

Well thats all you had to say...

I will take them.

**davischevy** · 09-08-2019, 05:38 PM

Maybe these will help. The stud is 3/8 16. Nice buy on those tubes.

*randy500* · 09-08-2019, 06:08 PM

Thanks for the pics Larry and it does seem the tubes are a good buy.
I wasnt sure if the temp wire was on the upper water pump bolt or not. So 2 different water pump stud bolts.

*randy500* · 09-08-2019, 06:11 PM

Did anynody catch my pulp fiction quote in post 29?

**Chevyland** · 09-12-2019, 12:09 AM

I have a complete setup
Including 4X4 manifolds

I would sell or trade

Not sure if it’s value

*randy500* · 09-12-2019, 12:14 AM

Quote:

Originally Posted by Chevyland

I have a complete setup
Including 4X4 manifolds

I would sell or trade

Not sure if it’s value

Sending you a PM now.

*randy500* · 09-12-2019, 12:32 AM

Maybe someone will get a chuckle out of this...around 6pm i opened a box i got in the mail, it was the pump setup i bought from Uncle. Very happy with the parts so i decided to inventory what i have.
Found out my brand new repro exhaust manifolds have air tubes but there not properly machined, i looked all around the garage and i dont have any 4wd manifolds so i got right on ebay...purchased a set at 9:11pm which is 2 minutes after chevyland posted his stuff for sale.....my timing sucks.

**DeadheadNM** · 09-12-2019, 09:31 AM

If Randy isn't interested in the setup Eric I might be....it it can fit in a checked piece of luggage

**davischevy** · 09-12-2019, 11:01 AM

I hope one of the other guys takes it, but I might be interested if they don't.

**Chevyland** · 09-12-2019, 05:29 PM

Quote:

Originally Posted by DeadheadNM

If Randy isn't interested in the setup Eric I might be....it it can fit in a checked piece of luggage

Pete,

Pack you bag as full as you can, with Cheyenne super wood grain stuff, hubcaps, door handles etc etc
Then we will know you have enough room for the smog setup to fit in it , when you leave

**DeadheadNM** · 09-12-2019, 05:33 PM

Lol!!

*randy500* · 09-12-2019, 06:01 PM

Quote:

Originally Posted by Chevyland

I have a complete setup
Including 4X4 manifolds

I would sell or trade

Not sure if it’s value

Eric,
Thanks for offering the parts, i dont have a current need and you have buyers waiting so I am reluctantly passing this onto them.

09-07-2019, 09:16 AM	#26
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,557	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed Here they are. Does 125 shipped work? Attached Images

09-07-2019, 12:53 PM	#28
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,557	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed Ok. These are brand new. Still have most of the black plating on them. Just been sitting on my shelf. Nice threads and no marks on the heads. I was going to use them on my 67 but I aquuired 2.5 ramhorns and I can't use them with the air injection.

09-08-2019, 05:38 PM	#30
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed Maybe these will help. The stud is 3/8 16. Nice buy on those tubes. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

09-08-2019, 06:08 PM	#31
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed Thanks for the pics Larry and it does seem the tubes are a good buy. I wasnt sure if the temp wire was on the upper water pump bolt or not. So 2 different water pump stud bolts.

09-08-2019, 06:11 PM	#32
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed Did anynody catch my pulp fiction quote in post 29?

09-12-2019, 12:09 AM	#33
Chevyland Senior Member Join Date: Aug 2013 Location: Ca. <-> Ma. Posts: 5,756	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed I have a complete setup Including 4X4 manifolds I would sell or trade Not sure if it’s value Attached Images

09-12-2019, 12:32 AM	#35
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed Maybe someone will get a chuckle out of this...around 6pm i opened a box i got in the mail, it was the pump setup i bought from Uncle. Very happy with the parts so i decided to inventory what i have. Found out my brand new repro exhaust manifolds have air tubes but there not properly machined, i looked all around the garage and i dont have any 4wd manifolds so i got right on ebay...purchased a set at 9:11pm which is 2 minutes after chevyland posted his stuff for sale.....my timing sucks.

09-12-2019, 09:31 AM	#36
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed If Randy isn't interested in the setup Eric I might be....it it can fit in a checked piece of luggage __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-12-2019, 11:01 AM	#37
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed I hope one of the other guys takes it, but I might be interested if they don't. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

09-12-2019, 05:33 PM	#39
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: Wanted: Smog Pump setup, small block, parts or complete, pictures also needed Lol!! __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.