What is it....tool time - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ol Blue K20** · 09-15-2019, 10:20 AM

Quote:

Originally Posted by Jrainman

OK I have no Idea what that tool is but will follow here to find out , but for me more importantly is never new Willams is a divison of Snap on,Now I no why the only 1/2 drive rachet I have never broke is my old trusty Willams rachet , and I have stripped the gears in plenty othes even snapped a few breaker bars .not trying to hi jack the thread here .

If you do happen to break it. Repair kits are available. Definitely a good tool.

Andy4639 · 09-15-2019, 10:40 AM

And the answer is.......

OK, I'll wait until this afternoon to say!

**Getter-Done** · 09-15-2019, 10:51 AM

Tuned in for the answer

.

**Ol Blue K20** · 09-15-2019, 11:09 AM

Quote:

Originally Posted by Andy4639

And the answer is.......

OK, I'll wait until this afternoon to say!

AARRGGGGHHHHH!!!!! what a tease...

Axle · 09-15-2019, 12:26 PM

Quote:

Originally Posted by Andy4639

And the answer is.......

OK, I'll wait until this afternoon to say!

If this turns into another safe thread,

we are going to find you.

=-)

Andy4639 · 09-15-2019, 03:50 PM

Ok guy's here it is.

The tool was issued only to the production line workers who bleed the brakes on the new vehicles as they rolled down the line.

The tool is a Proportional valve tool. It keeps the plunger from moving while they bleed the brakes as it moved down the line. It held the plunger in the center of the proportional valve. I have never seen one until this one. My friend gave it to me as a gift. So now you know the rest of the story!

**Ol Blue K20** · 09-15-2019, 06:21 PM

That's interesting. That tool would come handy in the public domain as well

68C15 · 09-15-2019, 07:54 PM

I can kind of seeing it work. I have the modern version, actually 4 of them.

Did someone loose their job over that tool disappearing?

Andy4639 · 09-15-2019, 08:03 PM

Quote:

Originally Posted by 68C15

I can kind of seeing it work. I have the modern version, actually 4 of them.

Did someone loose their job over that tool disappearing?

I don't know if anybody did are not but I bet whoever lost it was pissed!

**special-K** · 09-16-2019, 07:32 AM

Quote:

Originally Posted by Andy4639

Ok guy's here it is.

The tool was issued only to the production line workers who bleed the brakes on the new vehicles as they rolled down the line.

The tool is a Proportional valve tool. It keeps the plunger from moving while they bleed the brakes as it moved down the line. It held the plunger in the center of the proportional valve. I have never seen one until this one. My friend gave it to me as a gift. So now you know the rest of the story!

Yes Andy, that is the correct answer

09-15-2019, 10:40 AM	#27
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: What is it....tool time And the answer is....... OK, I'll wait until this afternoon to say! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-15-2019, 10:51 AM	#28
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,403	Re: What is it....tool time Tuned in for the answer . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

09-15-2019, 03:50 PM	#31
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: What is it....tool time Ok guy's here it is. The tool was issued only to the production line workers who bleed the brakes on the new vehicles as they rolled down the line. The tool is a Proportional valve tool. It keeps the plunger from moving while they bleed the brakes as it moved down the line. It held the plunger in the center of the proportional valve. I have never seen one until this one. My friend gave it to me as a gift. So now you know the rest of the story! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-15-2019, 06:21 PM	#32
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: What is it....tool time That's interesting. That tool would come handy in the public domain as well __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

09-15-2019, 07:54 PM	#33
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: What is it....tool time I can kind of seeing it work. I have the modern version, actually 4 of them. Did someone loose their job over that tool disappearing? __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.