I need a measurement. . . - The 1947 - Present Chevrolet & GMC Truck Message Board Network

clemsonteg · 09-17-2019, 10:04 AM

I am looking for a measurement between the top of the frame rail and the bottom of the wood floor directly above the axle. My frame and body are currently separated and I am trying to figure out how close the exhaust will be to the floor if I go over the axle. The airbags and bolt in c-notch are limiting my space.

**VictoriaHardware** · 09-17-2019, 12:15 PM

The Sub/Panel floor height is the same as pickups. In that area there is about 1/4" of clearance.

09-17-2019, 10:04 AM	#1
clemsonteg Registered User Join Date: Jul 2012 Location: Anderson,SC Posts: 953	I need a measurement. . . I am looking for a measurement between the top of the frame rail and the bottom of the wood floor directly above the axle. My frame and body are currently separated and I am trying to figure out how close the exhaust will be to the floor if I go over the axle. The airbags and bolt in c-notch are limiting my space.

09-17-2019, 12:15 PM	#2
VictoriaHardware Senior Member Join Date: Nov 2012 Location: Southeast Michigan Posts: 792	Re: I need a measurement. . . The Sub/Panel floor height is the same as pickups. In that area there is about 1/4" of clearance.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.