55.2-59 Info please? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ironworking · 09-20-2019, 05:09 PM

Does any body know the way to ID the front half of the OEM driveshaft on a 58 chevy 1/2 ton?

Thnx I.A.
Robert

Foot Stomper · 09-21-2019, 08:47 PM

Quote:

Originally Posted by Ironworking

Does any body know the way to ID the front half of the OEM driveshaft on a 58 chevy 1/2 ton?

Thnx I.A.
Robert

Robert, there's no such thing on a 58.

Ironworking · 09-21-2019, 09:05 PM

Quote:

Originally Posted by Foot Stomper

Robert, there's no such thing on a 58.

It is a 58 long wheel base. Did that not come with a 2 piece driveshaft?

**mongocanfly** · 09-21-2019, 09:14 PM

Driveshafts use somewhat generic parts...what exactly are you looking for?

Foot Stomper · 09-21-2019, 09:43 PM

Quote:

Originally Posted by Ironworking

It is a 58 long wheel base. Did that not come with a 2 piece driveshaft?

No, they were a single piece shaft.

Ironworking · 09-21-2019, 09:46 PM

Quote:

Originally Posted by mongocanfly

Driveshafts use somewhat generic parts...what exactly are you looking for?

I wanted to make sure i ID it correctly. I plan to sell it on the Big Bay. I do not want to mislead someone with the wrong info.

**mr48chev** · 09-21-2019, 10:46 PM

Well they list a center support for a 58 Truck. two styles in fact.

All I can say from there is take clear and concise photos, do some exacting measurements ( photograph it with a tape measure alongside it) and set your reserve at what you absolutely have to have.

Ironworking · 09-21-2019, 11:10 PM

Quote:

Originally Posted by mr48chev

Well they list a center support for a 58 Truck. two styles in fact.

All I can say from there is take clear and concise photos, do some exacting measurements ( photograph it with a tape measure alongside it) and set your reserve at what you absolutely have to have.

Sir, can you tell me where you find that listed? I believe you, but i would like to see a picture.

Ironworking · 09-21-2019, 11:26 PM

Quote:

Originally Posted by Foot Stomper

No, they were a single piece shaft.

The long wheel base must have a 2 piece driveshaft. They have a carrier bearing support. Single drive shafts have no need for a carrier bearing.

**mr48chev** · 09-21-2019, 11:44 PM

Quote:

Originally Posted by Ironworking

Sir, can you tell me where you find that listed? I believe you, but i would like to see a picture.

I used the Rock auto cheat sheet. they didn't list the U joints but showed the two different center supports for a 58. I'm thinking in line bolts is light duty and side by side is heavy duty.

https://www.rockauto.com/en/catalog/...+support,12743

**mr48chev** · 09-21-2019, 11:48 PM

Side note: Way back in the dark ages of the 70's (yes I am old) I built a T bucket with a 283 and cast iron power glide and used the front half of the driveshaft of the donor rig (chevy car) as my driveshaft. I positioned the engine to be able to use it.

Still no matter how mundane you think some part is there always seems to be that guy who just flat needs that part if your description and measurements are spot on.

**mongocanfly** · 09-22-2019, 07:03 AM

and not trying to pour cold water on it but brand new driveshaft parts and repair are fairly cheap and many different models and manufactures use the same brand parts..probably as cheap or cheaper than selling and shipping a part

09-20-2019, 05:09 PM	#1
Ironworking Registered User Join Date: Apr 2019 Location: New Boston, Tx Posts: 198	Info please? Does any body know the way to ID the front half of the OEM driveshaft on a 58 chevy 1/2 ton? Thnx I.A. Robert __________________ Ironworking's "diamond" in the rough 58 chevy lwb fleetside custom build. 100% Service Connected Disabled Vietnam Era Veteran.

09-21-2019, 09:14 PM	#4
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: Info please? Driveshafts use somewhat generic parts...what exactly are you looking for? __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

09-21-2019, 10:46 PM	#7
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: Info please? Well they list a center support for a 58 Truck. two styles in fact. All I can say from there is take clear and concise photos, do some exacting measurements ( photograph it with a tape measure alongside it) and set your reserve at what you absolutely have to have. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-21-2019, 11:48 PM	#11
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: Info please? Side note: Way back in the dark ages of the 70's (yes I am old) I built a T bucket with a 283 and cast iron power glide and used the front half of the driveshaft of the donor rig (chevy car) as my driveshaft. I positioned the engine to be able to use it. Still no matter how mundane you think some part is there always seems to be that guy who just flat needs that part if your description and measurements are spot on. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-22-2019, 07:03 AM	#12
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: Info please? and not trying to pour cold water on it but brand new driveshaft parts and repair are fairly cheap and many different models and manufactures use the same brand parts..probably as cheap or cheaper than selling and shipping a part __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver Last edited by mongocanfly; 09-22-2019 at 07:12 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.