|
06-09-2004, 10:19 PM
|
#1 |
|
The Sauz
Join Date: Mar 2002
Location: Chilliwack BC, Canada
Posts: 149
|
Axle Over?
I'm just wondering if anybodies done an axle over lift on the back of a coil sprung truck. I'm kinda curious what you did for shock mounts? I'm puttin in a newer axle so i have to get all my perches and and panhard mount done anyway, so a little fabbin is not a big deal. But some advice and pictures would be great.
__________________
68 lwb 2wd (spread between 3 garages) 72 Burb - Flat Deck 92 Yukon 3" lift - 33's - the new bush pig 01 Sierra - Daily Driver (for now) |
|
|
|
06-09-2004, 10:46 PM
|
#2 |
|
Account Suspended
Join Date: Dec 2003
Location: Texas
Posts: 2,686
|
i thought about it once thats about it I imagine if you get a longer panhard bar and possibly relocated the mount onto the housing tubes and torch some perches off shouldnt be a biggie
I put a 95 model rachet locker in my old 68 and did basically what i just said with the exception of it was on top of the trailin arms I used an old 3/4 ton type panhard bar with a homemade bracket If you can get all the parts get the 3/4 ton panhard bar the panhard bar bracket that goes on the axle tube and the bracket that goes on the frame since its angled differently |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
