67-72 back bumper on our trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigmoe · 10-03-2019, 06:20 PM

For those that have used the 67-72 back bumper I’m wondering if it comes a bit close to the back up lights? My 65 didn’t come with back up lights but I am adding them before it’s painted. I’m pondering if I might position them slightly higher when I cut the holes?

LostMy65 · 10-03-2019, 06:33 PM

Here's a thread with pics.
http://67-72chevytrucks.com/vboard/s...ghlight=Bumper

**Clyde65** · 10-03-2019, 06:49 PM

Here is mine

bigmoe · 10-03-2019, 06:49 PM

Thanks Lost. Judging from some of those pictures the stock location will work but seeing as I have to cut holes anyway for mine I think I'll go 1/2" or so higher.

bigmoe · 10-03-2019, 06:51 PM

Clyde yours sits a bit lower than some of the others I've seen on the forum.

Cohi · 10-04-2019, 07:43 AM

freshly installed using 67-72 brackets. the rev lights were already there original.

**The Rocknrod** · 10-04-2019, 08:24 AM

The Step-side bumper looks great on our series step-sides as well.

10-03-2019, 06:20 PM	#1
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 995	67-72 back bumper on our trucks For those that have used the 67-72 back bumper I’m wondering if it comes a bit close to the back up lights? My 65 didn’t come with back up lights but I am adding them before it’s painted. I’m pondering if I might position them slightly higher when I cut the holes?

10-03-2019, 06:33 PM	#2
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: 67-72 back bumper on our trucks Here's a thread with pics. http://67-72chevytrucks.com/vboard/s...ghlight=Bumper __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

10-03-2019, 06:49 PM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: 67-72 back bumper on our trucks Here is mine Attached Images __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

10-03-2019, 06:49 PM	#4
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 995	Re: 67-72 back bumper on our trucks Thanks Lost. Judging from some of those pictures the stock location will work but seeing as I have to cut holes anyway for mine I think I'll go 1/2" or so higher.

10-03-2019, 06:51 PM	#5
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 995	Re: 67-72 back bumper on our trucks Clyde yours sits a bit lower than some of the others I've seen on the forum.

10-04-2019, 07:43 AM	#6
Cohi Registered User Join Date: Aug 2018 Location: Denver, co Posts: 113	Re: 67-72 back bumper on our trucks freshly installed using 67-72 brackets. the rev lights were already there original. Attached Images __________________ Denver/Big Island -- Instagram: Slammed66c10 '46 Fleetmaster Coupe '64 C10 on Ridetech Air Ride '66 C10 on GSI Bagged Chassis - in progress '12 FLHR '11 Custom Homebuilt Chop/Softail

10-04-2019, 08:24 AM	#7
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 67-72 back bumper on our trucks The Step-side bumper looks great on our series step-sides as well. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.