CA WTB: 72' K10 Factory Sport bumper and brackets

Rear Bumper—Given that my truck is being restored in the Sacramento area, I would prefer if the part were in that general area. Thanks in advance.

[cypressbog]

I don't have what you're looking for but stating front or rear would help out.

I have a set of Short bed GMC front bumper brackets but those are truck specific.

[Madkidd007]

Well being a sport bumper I’d naturally assume that means rear. Keep in mind 67-72 are the same on the rear brackets and sport bumper. I “believe” the swb leaf 2wd trucks use the same brackets but all 4wd including 67-71 blazers will interchange also.

So the bumper interchanges on a 72 despite the 72 having the frame horns?

[Madkidd007]

Originally Posted by Martyt

So the bumper interchanges on a 72 despite the 72 having the frame horns?

Correct. The bumper and outter brackets are the same as previous years. I thought at first you meant brackets because your frame had been cutoff. But the horns match the bumper profile. So in your case any sport bumper and outter brackets from 67-72 will work. Just the inners are different, 99% sure on that

[71blksuper4x4]

If you are talking 4x4 rear brackets, it depends on swb vs lwb. Short is 69-71 blazer/swb leaf spring. They are modified from the factory on the inner brackets. 72 blazer just uses the outer brackets as the frame is stamped to be the inners.