KS Origin Floor Patch Material - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 10-02-2019, 10:03 AM

Have offered these before with some interest but shipping now days just kills shipping larger parts. Hate to scrap these so here is the last attempt. I will be attending the Hutchinson Swap Meet later this month at the Kansas State Fair grounds. Oct 25th & 26th, Friday and Saturday. Will bring these items with if there is sufficient interest in them. Three panels total, two panels, one at 18 x 50, one at 20 by 50 and larger one at 31 x 50 which does have cross braces.

Smaller panels are $25 each and larger panel is $35. Not bringing them unless someone posts here they have a REAL interest in purchase. This is the last go around for these, tired of storing them. If no interest, next trip is to the steel recycle. Post your reply here if wanting one or more panels. Better pricing on multiples. Large one is for front of bed back to the wheel well area. It has a couple minor pin holes but no serious issues. All from an 8 foot LWB.

**Ironhorse** · 10-02-2019, 10:04 AM

Last few pics.

**Ironhorse** · 10-14-2019, 08:06 AM

Bringing this back up to the top. Swap meet is getting closer for any interest in these. Will bring them to the meet if there is a REAL interest for them. GM original sheet metal for patches.

10-02-2019, 10:03 AM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Origin Floor Patch Material Have offered these before with some interest but shipping now days just kills shipping larger parts. Hate to scrap these so here is the last attempt. I will be attending the Hutchinson Swap Meet later this month at the Kansas State Fair grounds. Oct 25th & 26th, Friday and Saturday. Will bring these items with if there is sufficient interest in them. Three panels total, two panels, one at 18 x 50, one at 20 by 50 and larger one at 31 x 50 which does have cross braces. Smaller panels are $25 each and larger panel is $35. Not bringing them unless someone posts here they have a REAL interest in purchase. This is the last go around for these, tired of storing them. If no interest, next trip is to the steel recycle. Post your reply here if wanting one or more panels. Better pricing on multiples. Large one is for front of bed back to the wheel well area. It has a couple minor pin holes but no serious issues. All from an 8 foot LWB. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-02-2019, 10:04 AM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Origin Floor Patch Material Last few pics. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-14-2019, 08:06 AM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Origin Floor Patch Material Bringing this back up to the top. Swap meet is getting closer for any interest in these. Will bring them to the meet if there is a REAL interest for them. GM original sheet metal for patches. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.