The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-16-2019, 01:09 PM   #1
msg
Registered User
 
Join Date: Feb 2013
Location: GA
Posts: 1,313
Need some re assembly help on a 66 please

Ive been working on my truck for years and I am now finally in the re assembly stage. The approach has been to reverse step for step on each part I took off. I took pics of each part during the teardown to use as my reference along with the assembly manual. The first thing Im running into is to properly torque each part. Last night with some help from my nephew we got the crossmember back on the frame and ran the two upper bolts for now just to get it in place. Between the pics I have and the manual I could tell the direction the bolts needed to go, but the torque specs are not easy to read from the manual..its garbled up with the re copying through the years I guess. So for ex..heres the pics of before and now
Attached Images
  
__________________
Progress thread for my 66
http://67-72chevytrucks.com/vboard/s...d.php?t=623848

Last edited by msg; 10-16-2019 at 01:14 PM.
msg is offline   Reply With Quote
Old 10-16-2019, 01:10 PM   #2
msg
Registered User
 
Join Date: Feb 2013
Location: GA
Posts: 1,313
Re: Need some re assembly help on a 66 please

The bolts are in place, just need torquing
Attached Images
 
__________________
Progress thread for my 66
http://67-72chevytrucks.com/vboard/s...d.php?t=623848
msg is offline   Reply With Quote
Old 10-16-2019, 01:12 PM   #3
msg
Registered User
 
Join Date: Feb 2013
Location: GA
Posts: 1,313
Re: Need some re assembly help on a 66 please

the assembly manual is new to me and not so clear, but I guess 38 is safe? Same for the bolts that go vertically from underneath to the frame I would think.
Attached Images
   
__________________
Progress thread for my 66
http://67-72chevytrucks.com/vboard/s...d.php?t=623848

Last edited by msg; 10-16-2019 at 01:32 PM.
msg is offline   Reply With Quote
Old 10-16-2019, 03:25 PM   #4
vince1
Registered User
 
Join Date: Jan 2013
Location: Calgary Alberta
Posts: 1,167
Re: Need some re assembly help on a 66 please

Keep at it and you will eventually get there.

There are lots of torque specs online if you can't find what you are looking for.
vince1 is offline   Reply With Quote
Old 10-16-2019, 05:21 PM   #5
ACK
Registered User
 
ACK's Avatar
 
Join Date: Oct 2012
Location: Philly, PA
Posts: 540
Re: Need some re assembly help on a 66 please

Here's front end torque specs from the manual. Congrats on putting it back together, hope all goes smoothly.
Attached Images
 
__________________
My truck ain't dead, it just smells funny.
ACK is offline   Reply With Quote
Old 10-16-2019, 06:51 PM   #6
msg
Registered User
 
Join Date: Feb 2013
Location: GA
Posts: 1,313
Re: Need some re assembly help on a 66 please

Quote:
Originally Posted by vince1 View Post
Keep at it and you will eventually get there.

There are lots of torque specs online if you can't find what you are looking for.
Thanks Vince, I appreciate the encouragement. Feels a little intimidating, once I get a few parts together I'll relax a bit.

Quote:
Originally Posted by ACK View Post
Here's front end torque specs from the manual. Congrats on putting it back together, hope all goes smoothly.
Thanks Ack, I have a shop manual and like a dope didnt think to look there. I just had assembly manual on the brain.

Ive got another question on the lower control arm and the boot. Is it supposed to be snugged up before I re assemble? I rented a ball joint press and got these in but the gap had me wondering if the pressure from the install is supposed to make it flush.
Attached Images
  
__________________
Progress thread for my 66
http://67-72chevytrucks.com/vboard/s...d.php?t=623848
msg is offline   Reply With Quote
Old 10-16-2019, 08:04 PM   #7
bigmoe
Registered User
 
bigmoe's Avatar
 
Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 983
Re: Need some re assembly help on a 66 please

Don't torque the control arm bushings until you've got weight on the wheels.
bigmoe is online now   Reply With Quote
Old 10-16-2019, 09:18 PM   #8
cj847
Registered User
 
cj847's Avatar
 
Join Date: Sep 2016
Location: Ozark, MO
Posts: 567
Re: Need some re assembly help on a 66 please

Quote:
Originally Posted by msg View Post
the assembly manual is new to me and not so clear, but I guess 38 is safe? Same for the bolts that go vertically from underneath to the frame I would think.
I think 60-80 ft/lbs is what you want on those bolts. 38 in/lbs is like hand tite
cj847 is offline   Reply With Quote
Old 10-17-2019, 04:12 PM   #9
msg
Registered User
 
Join Date: Feb 2013
Location: GA
Posts: 1,313
Re: Need some re assembly help on a 66 please

Quote:
Originally Posted by bigmoe View Post
Don't torque the control arm bushings until you've got weight on the wheels.
Will do Moe, if I ever get wheels on

Quote:
Originally Posted by cj847 View Post
I think 60-80 ft/lbs is what you want on those bolts. 38 in/lbs is like hand tite
Thanks, I got 80lbs on them finally!

Now I have been reassembling the arms and trying to move on to the spindles, but the lower control arm ball joint boot is a PITA. I tried greasing it up and sliding it on, and it just wasnt working. I end up with it just sitting on top each time
Attached Images
  
__________________
Progress thread for my 66
http://67-72chevytrucks.com/vboard/s...d.php?t=623848
msg is offline   Reply With Quote
Old 10-17-2019, 04:13 PM   #10
msg
Registered User
 
Join Date: Feb 2013
Location: GA
Posts: 1,313
Re: Need some re assembly help on a 66 please

I called the MOOG tech line and the tech said I needed to rent that ball joint kit again and press it on. Jeez. Would have been good to have in the instructions, they did print that it needs to be flush with the arm over the joint. Doesnt say how.

So I go rent it again and hook it up
Attached Images
   
__________________
Progress thread for my 66
http://67-72chevytrucks.com/vboard/s...d.php?t=623848
msg is offline   Reply With Quote
Old 10-17-2019, 04:16 PM   #11
msg
Registered User
 
Join Date: Feb 2013
Location: GA
Posts: 1,313
Re: Need some re assembly help on a 66 please

And of course it ripped the boot. So I went to the parts store and they dont just sell the boot, you have to buy the whole thing again. The manager had mercy and ordered a new one and I can do an exchange when the part gets in tomorrow. When it comes to installing the boot, how do you guys deal with this issue?
Attached Images
 
__________________
Progress thread for my 66
http://67-72chevytrucks.com/vboard/s...d.php?t=623848
msg is offline   Reply With Quote
Old 10-17-2019, 08:38 PM   #12
nsb29
Senior Member
 
nsb29's Avatar
 
Join Date: Feb 2014
Location: new smyrna beach fl / 29 palms cal
Posts: 1,727
Re: Need some re assembly help on a 66 please

When I did mine it pushed down when I installed the spindles
__________________
Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent
nsb29 is offline   Reply With Quote
Old 10-18-2019, 08:53 AM   #13
msg
Registered User
 
Join Date: Feb 2013
Location: GA
Posts: 1,313
Re: Need some re assembly help on a 66 please

Quote:
Originally Posted by nsb29 View Post
When I did mine it pushed down when I installed the spindles
I thought the same, but my luck after getting this coil install worked out and everything in place..the boot still wouldn't have seated. Trying to avoid as many slip ups as possible.
__________________
Progress thread for my 66
http://67-72chevytrucks.com/vboard/s...d.php?t=623848
msg is offline   Reply With Quote
Old 10-19-2019, 06:07 PM   #14
msg
Registered User
 
Join Date: Feb 2013
Location: GA
Posts: 1,313
Re: Need some re assembly help on a 66 please

I did get the replacement boot but had the same trouble getting it on. The other side turned out better...but here is what I did. I took the larger tube that gave some more room for the boot to spread outward onto the tapered shape of the ball joint to keep it from binding and getting torn. But I still couldnt get it flush..it was snug after the hammering but I thought the spindle install and coil pressure would make it more flush but it hasnt yet. Once there are wheels on the front I will be able to put weight on it. Hopefully then it presses closer to the arm. Getting the coil in was tricky without the truck having enough weight to counter the floor jack pressure, heres a link if interested in how it was done.

http://67-72chevytrucks.com/vboard/s...d.php?t=795128
Attached Images
  
__________________
Progress thread for my 66
http://67-72chevytrucks.com/vboard/s...d.php?t=623848
msg is offline   Reply With Quote
Old 10-19-2019, 06:13 PM   #15
msg
Registered User
 
Join Date: Feb 2013
Location: GA
Posts: 1,313
Shock install question

Since I had a conversion done years back to disc brakes the install manual and shop manual wont be much help here. So I was wondering which torque spec to use for these bolts top and bottom. Im also needing to figure out how the top portion of the shock mounts to the frame since the instructions couldnt cover it. Here are my reference pics of what it looked like before I tore it down and once I did there is a shot of the lower portion so I can see what order the bolts and nut went directionally. But the top I didnt get a good pic of.
Attached Images
  
__________________
Progress thread for my 66
http://67-72chevytrucks.com/vboard/s...d.php?t=623848
msg is offline   Reply With Quote
Old 10-19-2019, 06:15 PM   #16
msg
Registered User
 
Join Date: Feb 2013
Location: GA
Posts: 1,313
New and old front shocks

Here is the shock and new parts and the old one where the top bolt parts are fused together
Attached Images
 
__________________
Progress thread for my 66
http://67-72chevytrucks.com/vboard/s...d.php?t=623848
msg is offline   Reply With Quote
Old 10-20-2019, 09:32 AM   #17
scottofksu
Registered User
 
scottofksu's Avatar
 
Join Date: Nov 2011
Location: Omaha, Nebraska
Posts: 437
Re: Need some re assembly help on a 66 please

I did 140 for top bolt and 60 for bottom bolt on the shock.

http://www.chuckschevytruckpages.com...que_specs.html

When I have ingested enough coffee and nicotine, and make it out to the shop I’ll get some pics of the ball joint. I used the same parts (e.g., MOOG).
__________________
Travis' Tribute Truck - 65 C10 Frame Up Restoration
http://67-72chevytrucks.com/vboard/s...d.php?t=495073
scottofksu is offline   Reply With Quote
Old 10-20-2019, 03:58 PM   #18
scottofksu
Registered User
 
scottofksu's Avatar
 
Join Date: Nov 2011
Location: Omaha, Nebraska
Posts: 437
Re: Need some re assembly help on a 66 please

Got some shots.

1. Boot doesn't touch a-arm.
2. You know they are fully driven home when the collar for the ball joint touches the collar on the a-arm.
Attached Images
  
__________________
Travis' Tribute Truck - 65 C10 Frame Up Restoration
http://67-72chevytrucks.com/vboard/s...d.php?t=495073
scottofksu is offline   Reply With Quote
Old 10-20-2019, 06:36 PM   #19
SkinnyG
Registered User
 
SkinnyG's Avatar
 
Join Date: Feb 2012
Location: Beautiful BC, Canada, eh?!
Posts: 2,246
Re: Need some re assembly help on a 66 please

I've never pressed the boots on with a press or anything, I've just shoved them on as snug as I can by hand. Once assembled, it will be fine.
__________________
1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, boosted-LS
1977 Silverado: Shortboxed & dropped, potato-potato
V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag
Lotus Super 7 Replica: Scratch-built street-legal rollerskate
SkinnyG is offline   Reply With Quote
Old 10-24-2019, 12:57 PM   #20
Chad215
Registered User
 
Join Date: Sep 2011
Location: Cypress, TX
Posts: 148
Re: Need some re assembly help on a 66 please

Quote:
Originally Posted by msg View Post
I did get the replacement boot but had the same trouble getting it on. The other side turned out better...but here is what I did. I took the larger tube that gave some more room for the boot to spread outward onto the tapered shape of the ball joint to keep it from binding and getting torn. But I still couldnt get it flush..it was snug after the hammering but I thought the spindle install and coil pressure would make it more flush but it hasnt yet. Once there are wheels on the front I will be able to put weight on it. Hopefully then it presses closer to the arm. Getting the coil in was tricky without the truck having enough weight to counter the floor jack pressure, heres a link if interested in how it was done.

http://67-72chevytrucks.com/vboard/s...d.php?t=795128
I just installed mine and this is about as good as I could get them also.
__________________
'64 GMC in progress
http://67-72chevytrucks.com/vboard/s...d.php?t=484861
Chad215 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:26 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com