|
11-16-2019, 06:58 PM
|
#1 |
|
Registered User
Join Date: Mar 2014
Location: Tacoma Wa
Posts: 146
|
Factory tach info
Does anyone have any pictures on the correct placement of the transmitter for the factory tach for pre 63 trucks? Was thinking that there would be some pre punched holes on the inner fender.
__________________
1953 3100 261cu in, sm420, 3.55 torque tube, omaha orange 1964 GMC 1000 series,custom, 305E, sm420 |
|
|
|
11-16-2019, 08:19 PM
|
#2 |
|
Registered User
Join Date: Nov 2009
Location: Sherman, ME
Posts: 2,366
|
Re: Factory tach info
Several years ago, I removed a factory tach from a junked out '62 C80 farm truck. That one had the transmitter box mounted on the firewall, inside the cab, over near the passenger side kick panel. Unfortunately, I didn't take any pics.
That appeared to be the factory installed location in that particular truck (didn't look like anyone had re-located it). But I don't know if that was the standard spot for mounting the transmitter box in all 60-62 trucks though. |
|
|
|
|
11-16-2019, 09:27 PM
|
#3 |
|
Registered User
 Join Date: Nov 2013
Location: Mayetta, Kansas
Posts: 439
|
Re: Factory tach info
I pretty sure it goes on the driver side inner fender
Posted via Mobile Device |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
