New to me 1972 K5

[lyrikz]

Nevermind, i see you mounted the shocks in a different area. Thats neat.

[CG]

Originally Posted by lyrikz

Nevermind, i see you mounted the shocks in a different area. Thats neat.

Welcome back Del? Haven't seen you post in a long time. I supposed I coulda just missed it =)

[lyrikz]

Originally Posted by CG

Welcome back Del? Haven't seen you post in a long time. I supposed I coulda just missed it =)

No, i left for a few years. Moved. But also, i had zero action on my posts so i just figured no one cared so i stopped posting. Its going back together now and the shell is being painted as we speak.

[mcmlxix]

Installed the custom rear body harness.
Terminated at a junction box so I can tie into the rear trailer harness (blue wire.)
I also have LED lights on all corners and will have my rear side markers flash with the turn signals.
I also ran the harness along the body from the firewall, along the rocker box, then up through the driver side wheel well. I still need to add some clips to secure the harness along the rocker box. It's wrapped in TechFLex F6 split loom.

I used a piece of flex conduit to snake the harness through the rocker box to help protect it from sharp edges and tight turns.

The only thing running inside the frame will be fuel and brake hard lines...

[mcmlxix]

I had my door panels sitting on a shelf for years...
I decided to take them down, wash them and hang them on the doors with a couple bolts. They were covered in Line-X and I had the trim powder coated in red. Still need some arm rests... trying to decide on Black or try Red....
I still need to install my NuRelic power window regulators as well...
Then figure out what to do with the hole where the window crank used to be... Maybe a cup holder...