1974 6-cyl with p/s in Chattanooga pick-a part - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**'68OrangeSunshine** · 12-09-2019, 05:58 PM

292s have the right [passenger] side motor mounts forward, and the fuel pump is in the middle, across from the left side motor mount.
The other L6s, 230 and 250, have symetrical motor mounts and the fuel pump is forward.
Also the 292 has a 2 inch taller block, and the lifter/pushrod cover plates are 6'' tall, not 4''
By ''air'' bracket, did you mean air conditioning compressor bracket, or the A.I.R. [Air Injection Reaction] smog pump holder?
Out of my reach, of course. I haven't been to Tennessee since I was in the military, 44 years ago.

12-09-2019, 05:58 PM	#2
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 8,115	Re: 1974 6-cyl with p/s in Chattanooga pick-a part 292s have the right [passenger] side motor mounts forward, and the fuel pump is in the middle, across from the left side motor mount. The other L6s, 230 and 250, have symetrical motor mounts and the fuel pump is forward. Also the 292 has a 2 inch taller block, and the lifter/pushrod cover plates are 6'' tall, not 4'' By ''air'' bracket, did you mean air conditioning compressor bracket, or the A.I.R. [Air Injection Reaction] smog pump holder? Out of my reach, of course. I haven't been to Tennessee since I was in the military, 44 years ago. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.