How To Remove The Lock Cylinder From A Blazer Hatch Handle - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**amcgeh01** · 07-23-2013, 10:21 PM

Check here, it may help depending on what step you are on...

http://67-72chevytrucks.com/vboard/s...=hatch+drawing

Quote:

Originally Posted by TRUCKRUNNER67

How do u get the handle out of the top
Posted via Mobile Device

**D.PASSMORE** · 01-22-2015, 05:06 PM

Good information...

whitetailbob · 08-14-2017, 04:53 PM

just wondering if the square stock of the handle is able to be pulled out of handle and a new piece installed...thanks

**1rippen6** · 08-14-2017, 10:01 PM

Quote:

Originally Posted by whitetailbob

just wondering if the square stock of the handle is able to be pulled out of handle and a new piece installed...thanks

Not easily, it is casted into the handle. I've done it before but I used a lathe, drill press, and dremel tool in that order.

whitetailbob · 08-14-2017, 10:33 PM

i thought it was cast around it thank you very much!

jjzepplin · 08-15-2017, 06:57 AM

Good info here! So say I am able to get my original out of my hatch. Then I am able to get the cylinder out. Now - I need a key. Where do I find one?

**1rippen6** · 08-15-2017, 07:12 AM

Quote:

Originally Posted by jjzepplin

Good info here! So say I am able to get my original out of my hatch. Then I am able to get the cylinder out. Now - I need a key. Where do I find one?

The original poster LockDoc. If you send him one of your keys he can match it so the same key works the doors and handle.

**DeadheadNM** · 08-15-2017, 10:37 AM

LockDoc just keyed a handle for me last week. Big thanks! I've got the handle out to be re-chromed right now.

jjzepplin · 08-15-2017, 12:21 PM

Quote:

Originally Posted by 1rippen6

The original poster LockDoc. If you send him one of your keys he can match it so the same key works the doors and handle.

I kinda figured he could do it. Thanks. I didn't know a door key was used. Guess I never tried one. Thought it was one of those mailbox sort of keys.

**1rippen6** · 08-15-2017, 12:33 PM

That may be the case but the door key will work.

**1rippen6** · 08-15-2017, 12:56 PM

Actually last year I bought an NOS hatch lock assembly off ebay and it had a square key like the ignition. I believe so anyhow I will have to dig it out and take a look.

jjzepplin · 08-15-2017, 01:27 PM

Going to try some keys...

jjzepplin · 08-15-2017, 01:32 PM

Just tried several door keys and sum mutha- wait for it- they fit but no deal.

robs71k5 · 02-26-2018, 11:16 PM

When it comes to making the square stock that fits over your handle . I was able to find a company that sells this stock . If comes in two or three inch lengths and only 1/2 inch diameter . I was able to machine down a piece of pipe with inside diameter 1/2 inch and outside diameter I had to machine down to look like the original part with a 'c' clip grove for reassembly . Once it was machined down I merely welded the square hole shaft to the new piece of pipe already machined down . The picture below is what the part I machined looks like that fits over the square holed shaft looks like . Again can also be done on drill press if patient . If having trouble email he at srpenner@hotmail.com

robs71k5 · 02-26-2018, 11:31 PM

The square stock and the pipe pictured below was able to build a couple parts and have a spare for sale . The square stock was not cheap (about $75) but if your wanting your build to closely resemble the original part then this is your best coarse of action .

robs71k5 · 02-26-2018, 11:32 PM

Assembled

NorthernMatthew · 08-09-2018, 04:37 PM

I'm adding myself onto this very useful thread, thanks Leon.

jjzepplin · 11-24-2019, 01:17 PM

OK. So mine was stuck all kinds of ways. I sheared the pin off at the end of the cylinder. Is there any way to fix this or do I just need another one? Any body got one?

CHEVY_DUDE · 12-02-2019, 11:11 AM

Did the handle use the same key as the doors and ignition? Or was it a completely different type of key? Mine came with the original handle, but no key that worked.

pound41 · 12-02-2019, 11:38 AM

yes ignition and door key works mine

69TowRig · 01-15-2020, 10:21 AM

I wish this thread existed in the mid-2000's when I bought mine. I pitched that handle and replaced it with a garage door unit. Now I wish I had the original handle back!

01-22-2015, 05:06 PM	#27
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle Good information...

08-14-2017, 04:53 PM	#28
whitetailbob Registered User Join Date: Aug 2016 Location: laurel MT Posts: 23	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle just wondering if the square stock of the handle is able to be pulled out of handle and a new piece installed...thanks

08-14-2017, 10:33 PM	#30
whitetailbob Registered User Join Date: Aug 2016 Location: laurel MT Posts: 23	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle i thought it was cast around it thank you very much!

08-15-2017, 06:57 AM	#31
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle Good info here! So say I am able to get my original out of my hatch. Then I am able to get the cylinder out. Now - I need a key. Where do I find one? __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

08-15-2017, 10:37 AM	#33
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle LockDoc just keyed a handle for me last week. Big thanks! I've got the handle out to be re-chromed right now. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

08-15-2017, 12:33 PM	#35
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle That may be the case but the door key will work.

08-15-2017, 12:56 PM	#36
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle Actually last year I bought an NOS hatch lock assembly off ebay and it had a square key like the ignition. I believe so anyhow I will have to dig it out and take a look.

08-15-2017, 01:27 PM	#37
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle Going to try some keys... __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

08-15-2017, 01:32 PM	#38
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle Just tried several door keys and sum mutha- wait for it- they fit but no deal. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-26-2018, 11:16 PM	#39
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 815	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle When it comes to making the square stock that fits over your handle . I was able to find a company that sells this stock . If comes in two or three inch lengths and only 1/2 inch diameter . I was able to machine down a piece of pipe with inside diameter 1/2 inch and outside diameter I had to machine down to look like the original part with a 'c' clip grove for reassembly . Once it was machined down I merely welded the square hole shaft to the new piece of pipe already machined down . The picture below is what the part I machined looks like that fits over the square holed shaft looks like . Again can also be done on drill press if patient . If having trouble email he at srpenner@hotmail.com Attached Images

02-26-2018, 11:31 PM	#40
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 815	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle The square stock and the pipe pictured below was able to build a couple parts and have a spare for sale . The square stock was not cheap (about $75) but if your wanting your build to closely resemble the original part then this is your best coarse of action . Attached Images

02-26-2018, 11:32 PM	#41
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 815	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle Assembled Attached Images

08-09-2018, 04:37 PM	#42
NorthernMatthew Registered User Join Date: Jan 2016 Location: Sherwood Park, Alberta Posts: 426	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle I'm adding myself onto this very useful thread, thanks Leon.

11-24-2019, 01:17 PM	#43
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle OK. So mine was stuck all kinds of ways. I sheared the pin off at the end of the cylinder. Is there any way to fix this or do I just need another one? Any body got one? __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

12-02-2019, 11:11 AM	#44
CHEVY_DUDE Registered User Join Date: Aug 2007 Location: So Cal Posts: 71	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle Did the handle use the same key as the doors and ignition? Or was it a completely different type of key? Mine came with the original handle, but no key that worked. __________________ 1962 Chevy II Nova 400 Sport Coupe 1962 Chevy II Nova 400 Station Wagon 1972 GMC Jimmy



Register or Log In To remove these advertisements.

12-02-2019, 11:38 AM	#45
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,268	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle yes ignition and door key works mine

01-15-2020, 10:21 AM	#46
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: How To Remove The Lock Cylinder From A Blazer Hatch Handle I wish this thread existed in the mid-2000's when I bought mine. I pitched that handle and replaced it with a garage door unit. Now I wish I had the original handle back! __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

Register or Log In To remove these advertisements.