Shift Rod Grommet/bushing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72tutone · 01-16-2020, 09:23 AM

Anyone know where I can get the bushing/grommet for a factory GM tilt.

See the circle in green. There is a grommet with a metal bushing

Classicparts shows these, but I dont think this is correct

https://www.classicparts.com/1947-76...SABEgIiH_D_BwE

https://www.classicparts.com/1967-78...ctinfo/91-065/

Or, are those what I need?

Thanks!

pickupman · 01-16-2020, 10:10 AM

Yes those are the correct ones

*randy500* · 01-16-2020, 03:47 PM

Quote:

Originally Posted by 72tutone

Anyone know where I can get the bushing/grommet for a factory GM tilt.

See the circle in green. There is a grommet with a metal bushing

Classicparts shows these, but I dont think this is correct

https://www.classicparts.com/1947-76...SABEgIiH_D_BwE

https://www.classicparts.com/1967-78...ctinfo/91-065/

Or, are those what I need?

Thanks!

Those are the correct parts and fit perfect.

72tutone · 01-17-2020, 08:56 AM

Quote:

Originally Posted by randy500

Those are the correct parts and fit perfect.

Thank you sir

Andy4639 · 01-17-2020, 10:09 AM

When I bought my new 71 C-10 tilt column it had that bushing installed.
Right randy500!

I used the Lakor shifter rod to hook it up to the 700-R4.

01-16-2020, 09:23 AM	#1
72tutone Registered User Join Date: May 2010 Location: St.Louis Posts: 644	Shift Rod Grommet/bushing Anyone know where I can get the bushing/grommet for a factory GM tilt. See the circle in green. There is a grommet with a metal bushing Classicparts shows these, but I dont think this is correct https://www.classicparts.com/1947-76...SABEgIiH_D_BwE https://www.classicparts.com/1967-78...ctinfo/91-065/ Or, are those what I need? Thanks! Attached Images

01-16-2020, 10:10 AM	#2
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: Shift Rod Grommet/bushing Yes those are the correct ones __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed Last edited by pickupman; 01-17-2020 at 09:57 AM.

01-17-2020, 10:09 AM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Shift Rod Grommet/bushing When I bought my new 71 C-10 tilt column it had that bushing installed. Right randy500! I used the Lakor shifter rod to hook it up to the 700-R4. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.