Antenna Wire Into Cab Seal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1-PU70 · 06-16-2004, 01:06 PM

What do you guys use to seal the cab where the antenna wire comes in?

stickshift_or_walk · 06-16-2004, 01:25 PM

PU70,

If it's a pretty tight fit, I've found hot glue to work well and last the longest. If the hole is quite a bit larger, silicone will stay in place where the hot glue won't.

If you go the glue gun route, get some high strength glue sticks, not the cheapo craft kind. I've seen the stuff hold paint pretty well, too.

SSOW

06-16-2004, 01:06 PM	#1
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	Antenna Wire Into Cab Seal What do you guys use to seal the cab where the antenna wire comes in? __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters

06-16-2004, 01:25 PM	#2
stickshift_or_walk Left Foot Functioning Join Date: May 2004 Location: Duncan, OK Posts: 348	PU70, If it's a pretty tight fit, I've found hot glue to work well and last the longest. If the hole is quite a bit larger, silicone will stay in place where the hot glue won't. If you go the glue gun route, get some high strength glue sticks, not the cheapo craft kind. I've seen the stuff hold paint pretty well, too. SSOW



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.