|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-16-2004, 07:43 PM
|
#1 |
|
Registered User
Join Date: Jan 2004
Location: Paso Robles, CA
Posts: 347
|
Engine Bay SHE RUNS!!!
OK Guys I finished hooking up everything this morning. Fired it at 11:08 little turned it over a couple times a little shot of starting fluid and she fired right up. Right to idle at 750rpm. 60psi oil pressure. Had a slight knock under the driver side valve cover. After a while we figured out it was the valve cover getting rubbed. I need thicker valve cover gaskets. undid the vaccuum advance plugged it and dialed it in to 10 degrees. Runs PERFECT. No leaks no runs no errors. Gotta finish covering the wiring and thats it fenders go on tomorrow.
I just want to say thanks to all of you. I never would have had the guts to attempt this overhaul. It is from all of your knowledge that I was able to pull this off. Thanks again, Tony |
|
|
|
06-16-2004, 07:51 PM
|
#2 |
|
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Tony -- I'm so happy things works out properly the first time for you!
Well done, keep the good work up!!
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
|
|
|
|
06-16-2004, 08:25 PM
|
#3 |
|
State of Confusion!
  
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,216
|
Good news!. Time for break in and burnouts:
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
|
06-16-2004, 09:20 PM
|
#4 |
|
You get what you pay for
 
Join Date: Dec 1999
Location: Cherryville, NC
Posts: 4,798
|
Did you bring it right up to 2500-3000 rpm to break in the cam for about 20 to 30 minutes? I'm not sure of your engine combo, but you must break in a new flat tappet cam. You never let it idle or you will kill it.
__________________
Mike 1985 Chevy C-10 |
|
|
|
|
06-16-2004, 09:55 PM
|
#5 |
|
Registered User
Join Date: Jan 2004
Location: Paso Robles, CA
Posts: 347
|
The engine had 1000 miles on it allready all I did was clean it up regasket and replace all the external parts.
|
|
|
|
|
06-16-2004, 10:18 PM
|
#6 |
|
Account Suspended
Join Date: Dec 2003
Location: Texas
Posts: 2,686
|
Kinda looks like my motor Gotta love chevy Orange!
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
