PA warn hubs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jaros44sr** · 02-07-2020, 04:41 PM

used set of warn hubs, chrome in unbelievable shape 50.00 AIWI shipping and paypal fees extra

[url=https://flic.kr/p/2iqjW75]20200207_141205

Terrysch · 02-07-2020, 05:13 PM

Are these off of, for a 1/2 ton vehicle?
Are all of the other parts in good condition?
I will take the set.
Terry

Terrysch · 02-07-2020, 05:16 PM

I do understand AIWI and accept this condition.
But would still appreciate the answer to my condition question.
Thanks!
Terry

**jaros44sr** · 02-07-2020, 07:25 PM

I can visually look them over more closely, but I wouldn't know what to look for, they were on my Jimmy 20 years ago. If you know more about them then me, or other forum member, I would gladly listen.

Sold, pending further examine

**jaros44sr** · 02-07-2020, 07:31 PM

They are listed from '69 thru '91 for chevy, still has a service kit, check them out on line

Terrysch · 02-07-2020, 08:11 PM

Jim,
Will check them out on line per your suggestion.
Terry

**jaros44sr** · 02-07-2020, 08:31 PM

sure, I'll see what I can find

**jaros44sr** · 02-07-2020, 08:52 PM

Did some searching...typed in warn hubs, lots of info. and diagrams, plus service reps around the country. Seems to me, everything is there as should be

**CS1972** · 02-07-2020, 10:00 PM

I hope this helps. The pictures below are what I just took out of my 72 1/2 ton 4X4 this past December and sold on Ebay. They were working, I was only removing them because I wanted the blue dial factory hubs. Seems like there are a couple differences.

*randy500* · 02-08-2020, 02:32 AM

If it helps it looks like the lower left large cast aluminum piece is missing the inner splined freewheel, usually held in place by a clip. Its the part that is splined to the outer axle stub.
The one above it appears to be complete.

**jaros44sr** · 02-08-2020, 01:16 PM

Thanks for the pic Ron, seems like these are complete minus a small plastic spacer and maybe a snap ring

still for sale

02-07-2020, 04:41 PM	#1
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,503	warn hubs used set of warn hubs, chrome in unbelievable shape 50.00 AIWI shipping and paypal fees extra [url=https://flic.kr/p/2iqjW75]20200207_141205 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-07-2020, 05:13 PM	#2
Terrysch Registered User Join Date: Feb 2019 Location: Ozark, MO Posts: 575	Re: warn hubs Are these off of, for a 1/2 ton vehicle? Are all of the other parts in good condition? I will take the set. Terry

02-07-2020, 05:16 PM	#3
Terrysch Registered User Join Date: Feb 2019 Location: Ozark, MO Posts: 575	Re: warn hubs I do understand AIWI and accept this condition. But would still appreciate the answer to my condition question. Thanks! Terry

02-07-2020, 07:25 PM	#4
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,503	Re: warn hubs I can visually look them over more closely, but I wouldn't know what to look for, they were on my Jimmy 20 years ago. If you know more about them then me, or other forum member, I would gladly listen. Sold, pending further examine __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-07-2020, 07:31 PM	#5
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,503	Re: warn hubs They are listed from '69 thru '91 for chevy, still has a service kit, check them out on line __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-07-2020, 08:11 PM	#6
Terrysch Registered User Join Date: Feb 2019 Location: Ozark, MO Posts: 575	Re: warn hubs Jim, Will check them out on line per your suggestion. Terry

02-07-2020, 08:31 PM	#7
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,503	Re: warn hubs sure, I'll see what I can find __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-07-2020, 08:52 PM	#8
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,503	Re: warn hubs Did some searching...typed in warn hubs, lots of info. and diagrams, plus service reps around the country. Seems to me, everything is there as should be __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-07-2020, 10:00 PM	#9
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 448	Re: warn hubs I hope this helps. The pictures below are what I just took out of my 72 1/2 ton 4X4 this past December and sold on Ebay. They were working, I was only removing them because I wanted the blue dial factory hubs. Seems like there are a couple differences. Attached Images __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

02-08-2020, 02:32 AM	#10
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: warn hubs If it helps it looks like the lower left large cast aluminum piece is missing the inner splined freewheel, usually held in place by a clip. Its the part that is splined to the outer axle stub. The one above it appears to be complete.

02-08-2020, 01:16 PM	#11
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,503	Re: warn hubs Thanks for the pic Ron, seems like these are complete minus a small plastic spacer and maybe a snap ring still for sale __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.