Interchangeable Parts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ItsMyRoadBiatch · 06-07-2004, 06:41 PM

where can i find in writing which parts are interchangeable with an 84 c10 model truck? i know there has got to be some kind of manual or website or something out there that has this information... any help would be appreciated!

Blue Beard · 06-07-2004, 08:38 PM

Could try Hollander parts interchange manual....

ItsMyRoadBiatch · 06-07-2004, 08:55 PM

i tried it, and they have everything except the years that i am looking for

dswancutt · 06-16-2004, 10:31 PM

Get a GM parts manual off of eBay. I have the 73-78, 79-84, and the 85. It's the best way to cross reference parts. Make sure you get the parts catalog, NOT the illustration catalog, as it only has the group codes, not the actual part numbers. The illustration catalog is helpful, but not necessary.

Hope this helps

Doug

GMC1tondually4dr · 06-18-2004, 02:36 AM

A crash book by Mitchell also works. Body shops have them. Mostly for sheetmetal, interior and suspension, some engine stuff. I have one from 1995 and it works for 81 to 91 subs and one tons,and all the newer stuff. Look up your part, then check to see if it is used in other years. Thats the way I found out for sure that all front doors on 73 to 91 subs, 73 to 87 trucks and one tons are the same. Same part number for the door shell.

**Captkaos** · 06-18-2004, 11:28 AM

Quote:

Originally Posted by GMC1tondually4dr

Thats the way I found out for sure that all front doors on 73 to 91 subs, 73 to 87 trucks and one tons are the same. Same part number for the door shell.

This isn't actually accurate. The outer skin is the same, but the inside is not. Doors are split 73-76 and 77-91 for the fronts. 77-91 has the provision for the power windows, where the 73-76 does not. A complete door will bolt up to any year, BUT if you shell is bad, you cannot put 77-91 guts in a 73-76 and expect it to work, same is true in reverse.

GMC1tondually4dr · 06-18-2004, 09:52 PM

I stand corrected, the insides are different ,but the part number is the same for the door shell its self. In a body shop if the insides have to be transfered it is done by the bodyman and pays accordingly. This is pointed out in the crash book.

I suppose I am assuming that a guy that is swapping doors can swap the insides too.(naaaah.......#1, I am assuming.....#2 my wife says I am wrong ALL the time). So I AM WRONG..............she said that I WILL be punished....

......hmmmmm........maybe ....not .....that....bad ....after all...

GMC1tondually4dr · 06-18-2004, 10:05 PM

Kaptkaos, I was wrong. I should have said '77 to '88 regular trucks and '77 to 91 'Burbs and 1 tons. I am sorry for any confusion (Senior moment I guess

)

06-07-2004, 06:41 PM	#1
ItsMyRoadBiatch Registered User Join Date: Jun 2004 Posts: 3	Interchangeable Parts? where can i find in writing which parts are interchangeable with an 84 c10 model truck? i know there has got to be some kind of manual or website or something out there that has this information... any help would be appreciated!

06-07-2004, 08:38 PM	#2
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Could try Hollander parts interchange manual.... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

06-07-2004, 08:55 PM	#3
ItsMyRoadBiatch Registered User Join Date: Jun 2004 Posts: 3	i tried it, and they have everything except the years that i am looking for

06-16-2004, 10:31 PM	#4
dswancutt Registered User Join Date: Jul 2003 Location: Franklin, NE Posts: 387	Get a GM parts manual off of eBay. I have the 73-78, 79-84, and the 85. It's the best way to cross reference parts. Make sure you get the parts catalog, NOT the illustration catalog, as it only has the group codes, not the actual part numbers. The illustration catalog is helpful, but not necessary. Hope this helps Doug

06-18-2004, 02:36 AM	#5
GMC1tondually4dr Registered User Join Date: Jun 2004 Location: Rosemount, MN Posts: 341	A crash book by Mitchell also works. Body shops have them. Mostly for sheetmetal, interior and suspension, some engine stuff. I have one from 1995 and it works for 81 to 91 subs and one tons,and all the newer stuff. Look up your part, then check to see if it is used in other years. Thats the way I found out for sure that all front doors on 73 to 91 subs, 73 to 87 trucks and one tons are the same. Same part number for the door shell.

06-18-2004, 09:52 PM	#7
GMC1tondually4dr Registered User Join Date: Jun 2004 Location: Rosemount, MN Posts: 341	I stand corrected, the insides are different ,but the part number is the same for the door shell its self. In a body shop if the insides have to be transfered it is done by the bodyman and pays accordingly. This is pointed out in the crash book. I suppose I am assuming that a guy that is swapping doors can swap the insides too.(naaaah.......#1, I am assuming.....#2 my wife says I am wrong ALL the time). So I AM WRONG..............she said that I WILL be punished.... ......hmmmmm........maybe ....not .....that....bad ....after all...

06-18-2004, 10:05 PM	#8
GMC1tondually4dr Registered User Join Date: Jun 2004 Location: Rosemount, MN Posts: 341	Kaptkaos, I was wrong. I should have said '77 to '88 regular trucks and '77 to 91 'Burbs and 1 tons. I am sorry for any confusion (Senior moment I guess )



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.