Need help with my engine casting numbers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VannattaJ101 · 06-19-2004, 01:46 AM

Hey all ran into kind of a stumper. I have a 1970 C20 Camper Special longhorn, I was going over the numbers on my engine trying to see if it was a 2 bolt or 4bolt main but the numbers i find are coming up with a 262 the title says the engine is a 350 and so do the emblems on the side of the truck. Well here are the numbers I found any help would be apriciated.... 1st T0522CZT 2nd 152162665 and 3rd 355808 or 355909. Thanks.

krue · 06-19-2004, 01:59 AM

Welcome to the board from south Mississippi! Where did you run the numbers? I usually use www.mortec.com

krue · 06-19-2004, 02:01 AM

It also shows as a 76-79 305 using 355909. That's the beauty and the trouble with GM making a ton of different engines using the same block. They can be swapped with no trouble and you can't look at them and tell the difference.

zboy · 06-19-2004, 02:04 AM

Hey, i have been trying to do the same thiing with my 69 c-10 custom. i have found a site that you may want to check out, www.morTec.com. It gives where, how and runs the numbers for you

VannattaJ101 · 06-19-2004, 02:49 AM

Yeah i checked Mortec and it told me the same thing either it is a 262 or 305. I am thinkin that the guy i bought the truck from lied to me. Oh well win some lose some. gonna get deeper into it tomorrow too dark now. Thanks for the help.

06-19-2004, 01:46 AM	#1
VannattaJ101 Registered User Join Date: Jun 2004 Location: Kent, Washington Posts: 6	Need help with my engine casting numbers Hey all ran into kind of a stumper. I have a 1970 C20 Camper Special longhorn, I was going over the numbers on my engine trying to see if it was a 2 bolt or 4bolt main but the numbers i find are coming up with a 262 the title says the engine is a 350 and so do the emblems on the side of the truck. Well here are the numbers I found any help would be apriciated.... 1st T0522CZT 2nd 152162665 and 3rd 355808 or 355909. Thanks.

06-19-2004, 01:59 AM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Welcome to the board from south Mississippi! Where did you run the numbers? I usually use www.mortec.com __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

06-19-2004, 02:01 AM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	It also shows as a 76-79 305 using 355909. That's the beauty and the trouble with GM making a ton of different engines using the same block. They can be swapped with no trouble and you can't look at them and tell the difference. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

06-19-2004, 02:04 AM	#4
zboy Registered User Join Date: Jun 2004 Location: indpls,in Posts: 14	Hey, i have been trying to do the same thiing with my 69 c-10 custom. i have found a site that you may want to check out, www.morTec.com. It gives where, how and runs the numbers for you

06-19-2004, 02:49 AM	#5
VannattaJ101 Registered User Join Date: Jun 2004 Location: Kent, Washington Posts: 6	Yeah i checked Mortec and it told me the same thing either it is a 262 or 305. I am thinkin that the guy i bought the truck from lied to me. Oh well win some lose some. gonna get deeper into it tomorrow too dark now. Thanks for the help.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.