c30 factory rear sway bar end links

[mike in mo]

anyone got a good part number for 1979 c 30 dually camper special 4 door sway bar end links or a number for a kits that will work?

[SCOTI]

Originally Posted by mike in mo

anyone got a good part number for 1979 c 30 dually camper special 4 door sway bar end links or a number for a kits that will work?

I don't recall anything special about the end links that came off my CC 2wd dually. If you have the pieces required for the assembly, standard aftermarket bushings would work as replacements.

Are you missing something?

[mike in mo]

this truck was a basket case when i got it and the guy that took it apart didn't keep any of the old parts so i have the spring plate bar mounts the bushing brackets and the bar it self. i cant find a end link kit to order and have no old parts to go by to know how long the spacers and bolts in the end link need to be.

[SCOTI]

Originally Posted by mike in mo

this truck was a basket case when i got it and the guy that took it apart didn't keep any of the old parts so i have the spring plate bar mounts the bushing brackets and the bar it self. i cant find a end link kit to order and have no old parts to go by to know how long the spacers and bolts in the end link need to be.

I'll look through my dually parts. I should have the end links & can get you a length.

Beyond that, it's just the bolt that goes through the sleeve & the bushings/washers @ each end. I always upgrade to Energy Suspension pieces there as well as up-size the bolt (they're usually 5/16 so I step up to 3/8). Worst case, you can always go shorter or longer on the sleeve. I usually trim them shorter to allow the bar to do it's job sooner but my stuff is always getting lowered.

[my86lb]

Here you go

[my86lb]

Energy Suspension Sway Bar End Link Sets 9.8149R is universal

[mike in mo]

Thanks alot I think I can get it now.