Clean fuel line connection to Street Demon Carb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

G-NUT · 03-31-2020, 12:13 PM

Anyone have any pics or thoughts for clean looking fuel line connection to a Street Demon carb?

**The Rocknrod** · 03-31-2020, 12:20 PM

I'm using the inverted flare/nut fitting sold on eBay and Summit for the Street Demon carb. Since it comes out of the carb at a low angle then 90 forward, then 90 down toward the fuel pump. Simple.

**The Rocknrod** · 03-31-2020, 12:49 PM

They make one that looks like the Edelbrock that goes forward. The problem with this one is you run a garden hose out of it, unless you get a nut and sleeve and flare the tube that heads to the fuel pump.

**The Rocknrod** · 03-31-2020, 12:50 PM

You can use a short piece of rubber and a nipple, 90 the hard line forward.

G-NUT · 04-03-2020, 12:52 PM

Thank you for the responses. I appreciate it.
The fitting in your first response actually came with my carb. I was thinking I might be able to utilize it.

The Edelbrock looking fuel feed I found in an internet search. It's somewhat of what I was looking for, but I want my lines to be black not polished due to the overall look I'm working towards.

03-31-2020, 12:13 PM	#1
G-NUT Registered User Join Date: Apr 2014 Location: Baldwin County, Alabama Posts: 164	Clean fuel line connection to Street Demon Carb Anyone have any pics or thoughts for clean looking fuel line connection to a Street Demon carb? __________________ '84 Suburban C10 Silverado - laying pinchweld to the ground on 22/24. /Porterbuilt / Accuair / Bonspeed / Landsail / Auburn Gear / Richmond Gear / Moser / Raybestos / ProMaxx / Edlebrock / Street Demon / Taylor Wire / K&N / MSD / KillMat / SOLD: 1985 GMC Sierra Classic 2500 3+3 Crew Cab Long Bed

03-31-2020, 12:20 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Clean fuel line connection to Street Demon Carb I'm using the inverted flare/nut fitting sold on eBay and Summit for the Street Demon carb. Since it comes out of the carb at a low angle then 90 forward, then 90 down toward the fuel pump. Simple. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 03-31-2020 at 12:54 PM.

03-31-2020, 12:49 PM	#3
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Clean fuel line connection to Street Demon Carb They make one that looks like the Edelbrock that goes forward. The problem with this one is you run a garden hose out of it, unless you get a nut and sleeve and flare the tube that heads to the fuel pump. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 03-31-2020 at 12:56 PM.

03-31-2020, 12:50 PM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Clean fuel line connection to Street Demon Carb You can use a short piece of rubber and a nipple, 90 the hard line forward. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-03-2020, 12:52 PM	#5
G-NUT Registered User Join Date: Apr 2014 Location: Baldwin County, Alabama Posts: 164	Re: Clean fuel line connection to Street Demon Carb Thank you for the responses. I appreciate it. The fitting in your first response actually came with my carb. I was thinking I might be able to utilize it. The Edelbrock looking fuel feed I found in an internet search. It's somewhat of what I was looking for, but I want my lines to be black not polished due to the overall look I'm working towards. __________________ '84 Suburban C10 Silverado - laying pinchweld to the ground on 22/24. /Porterbuilt / Accuair / Bonspeed / Landsail / Auburn Gear / Richmond Gear / Moser / Raybestos / ProMaxx / Edlebrock / Street Demon / Taylor Wire / K&N / MSD / KillMat / SOLD: 1985 GMC Sierra Classic 2500 3+3 Crew Cab Long Bed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.