PA 67-72 partout - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Burnsy01** · 04-04-2020, 04:47 PM

Quote:

Originally Posted by Gary 70 Jimmy

Are you going to cut up the frame need the rear spring hangers for a 69 blazer

Frame is getting hacked up . Ill be at that point in a couple weeks. Thanks

Nick

**Burnsy01** · 04-04-2020, 04:49 PM

Everyone wanting parts/ has asked for parts so far make sure these are what your looking for . I havent had a chance to dig for the hood latch yet.

Onry69CST · 04-04-2020, 08:08 PM

I could use the rear frame crossmember just above the front of the rear spring hangers if in good shape. I could pickup in person. Is the frame rusted up or bent anywhere?

**dozerbill72** · 04-04-2020, 10:55 PM

Payment sent for shifter ring.

Thanks, Bill

**Burnsy01** · 04-04-2020, 11:08 PM

Quote:

Originally Posted by dozerbill72

Payment sent for shifter ring.

Thanks, Bill

Thanks, I will pack it tomorrow and it will ship Monday. Thank you

Nick

**Sand Wrench** · 04-05-2020, 03:47 AM

Is the driver's side latch in decent shape? Price?

**Burnsy01** · 04-05-2020, 09:22 AM

Quote:

Originally Posted by Sand Wrench

Is the driver's side latch in decent shape? Price?

Yes it’s decent . 30 bucks shipped if it’s just the door latch . I can have it out next weekend , I’m just trying to catch up peoples parts . Thanks
Nick

jmking9 · 04-05-2020, 03:16 PM

Any luck on the steering center link and shock mounts I asked about?

**Burnsy01** · 04-05-2020, 03:20 PM

Quote:

Originally Posted by jmking9

Any luck on the steering center link and shock mounts I asked about?

Working on it at the moment . Thanks for your patience !

gpgofast · 04-05-2020, 08:28 PM

What shape is the outside mirror? Shipping to 89704 zip.

slikside · 04-05-2020, 09:03 PM

Does it have the flywheel/flexplate dust cover? Metal or plastic, and what condition is it in?

slikside · 04-05-2020, 09:04 PM

shipping to 92071 if decent.

**Burnsy01** · 04-06-2020, 10:30 AM

Quote:

Originally Posted by slikside

Does it have the flywheel/flexplate dust cover? Metal or plastic, and what condition is it in?

This truck doesnt but I have a 78 k10 with a 350/350 setup on it . I imagine its the same?

Picture of the hood latch for the guy wanting it

slikside · 04-06-2020, 11:18 PM

Quote:

Originally Posted by slikside

Does it have the flywheel/flexplate dust cover? Metal or plastic, and what condition is it in?

Quote:

Originally Posted by Burnsy01

This truck doesnt but I have a 78 k10 with a 350/350 setup on it . I imagine its the same?

I would think so as well, I have same 350/350 combo, albeit C-10.

What condition is it in? is it metal or plastic? Pics?

If decent, shipping to 92071...

Thanks

f.flujan · 04-06-2020, 11:41 PM

I’m in need of passenger side door glass setting channel. Can’t find it. Somewhere in my garage 🤦🏽*♂️

REDROCKER652002 · 04-07-2020, 02:43 AM

Quote:

Originally Posted by Burnsy01

This truck doesnt but I have a 78 k10 with a 350/350 setup on it . I imagine its the same?

Picture of the hood latch for the guy wanting it

i cannot seem to reply to your IM. My kid went ahead and ordered one from Brothers. They had is on sale for 50.00 and he ordered a bunch of other stuff as well. So, whoever is second in line can grab it.

Thanks for being patient, I had no idea he was ordering it on his own. Damn Kids. LOL.

RR

**CarlsLQ9SS** · 04-08-2020, 06:53 PM

Received the shifter part today, fast shipping! Bump for your other parts!

Dross9065 · 04-08-2020, 09:07 PM

I'd be interested in the idler arm bracket assuming it's the same for 2wd. Also I need the very front crossmember the one under the fan shroud. Live in Buckeye, AZ 85396.
Thanks, Dave

**Gyrine** · 04-10-2020, 11:11 PM

I would be interested in a 1970 high hump and Transfer case shifter.

**Burnsy01** · 04-11-2020, 04:11 PM

Quote:

Originally Posted by Gyrine

I would be interested in a 1970 high hump and Transfer case shifter.

Hey, I dont have a high hump but I do have the shifter. It is missing the little linkage that actually connects the two. I would do $75 shipped to your door.

**Gyrine** · 04-11-2020, 07:49 PM

Sent you a PM

fastlane · 04-11-2020, 08:09 PM

I need a driver side door handle, the bracket that keeps the glove box from falling all the way open and the rear view mirror. Shipped to the frozen tundra! 54301

fastlane · 04-11-2020, 08:10 PM

Does it still have the factory radio?

**derotoreut** · 04-11-2020, 10:15 PM

Maybe interested in the Dana 44 front axle if it's in good shape. Seeing it is a disc axle, is the truck a 72? Do you know what year the axle is? How about gear ratio? Any pictures of it? Thanks.

**gmc 2500 4x4** · 04-12-2020, 05:41 AM

are the doors junk?

04-04-2020, 04:49 PM	#27
Burnsy01 Chevy Freak Join Date: Aug 2019 Location: Conneaut Lake , Pennsylvania Posts: 225	Re: 67-72 partout Everyone wanting parts/ has asked for parts so far make sure these are what your looking for . I havent had a chance to dig for the hood latch yet. Attached Images __________________ Nick 71 K20 5.9 p pump cummins (in progress) 68 Camaro 454BBC 86 Camaro 5.3LS turbo

04-04-2020, 08:08 PM	#28
Onry69CST Registered User Join Date: Jan 2019 Location: Mantua Ohio Posts: 190	Re: 67-72 partout I could use the rear frame crossmember just above the front of the rear spring hangers if in good shape. I could pickup in person. Is the frame rusted up or bent anywhere?

04-04-2020, 10:55 PM	#29
dozerbill72 Senior Member Join Date: Oct 2015 Location: Berryville Arkansas Posts: 402	Re: 67-72 partout Payment sent for shifter ring. Thanks, Bill

04-05-2020, 03:47 AM	#31
Sand Wrench Senior Member Join Date: Sep 2016 Location: Garnett, Kansas Posts: 279	Re: 67-72 partout Is the driver's side latch in decent shape? Price? __________________ You ever have one of those mornings where you wake up owning more trucks than you did the night before? 1972 K5 1972 K10 1967 K20 bucket truck

04-05-2020, 03:16 PM	#33
jmking9 Registered User Join Date: Sep 2006 Location: Riverton KS Posts: 832	Re: 67-72 partout Any luck on the steering center link and shock mounts I asked about? __________________ 1970 SWB Build

04-05-2020, 08:28 PM	#35
gpgofast Registered User Join Date: Jan 2016 Location: Washoe Valley, NV Posts: 110	Re: 67-72 partout What shape is the outside mirror? Shipping to 89704 zip.

04-05-2020, 09:03 PM	#36
slikside Registered User Join Date: Jun 2010 Location: San Diego Co. Posts: 1,193	Re: 67-72 partout Does it have the flywheel/flexplate dust cover? Metal or plastic, and what condition is it in? __________________ 1972 Chevy C-10, SWB, Fleet, 350/350, PS, PB, HEI, mostly stock, Survivor.

04-05-2020, 09:04 PM	#37
slikside Registered User Join Date: Jun 2010 Location: San Diego Co. Posts: 1,193	Re: 67-72 partout shipping to 92071 if decent. __________________ 1972 Chevy C-10, SWB, Fleet, 350/350, PS, PB, HEI, mostly stock, Survivor.

04-06-2020, 11:41 PM	#40
f.flujan Registered User Join Date: Dec 2016 Location: Menifee,ca Posts: 65	Re: 67-72 partout I’m in need of passenger side door glass setting channel. Can’t find it. Somewhere in my garage 🤦🏽*♂️

04-08-2020, 06:53 PM	#42
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,172	Re: 67-72 partout Received the shifter part today, fast shipping! Bump for your other parts!

04-08-2020, 09:07 PM	#43
Dross9065 Registered User Join Date: Dec 2018 Location: Buckeye, AZ Posts: 17	Re: 67-72 partout I'd be interested in the idler arm bracket assuming it's the same for 2wd. Also I need the very front crossmember the one under the fan shroud. Live in Buckeye, AZ 85396. Thanks, Dave

04-10-2020, 11:11 PM	#44
Gyrine Senior Member Join Date: Jun 2015 Location: Huntsville, AL Posts: 203	Re: 67-72 partout I would be interested in a 1970 high hump and Transfer case shifter.

04-11-2020, 07:49 PM	#46
Gyrine Senior Member Join Date: Jun 2015 Location: Huntsville, AL Posts: 203	Re: 67-72 partout Sent you a PM

04-11-2020, 08:09 PM	#47
fastlane Registered User Join Date: Dec 2012 Location: Green Bay Wisconsin Posts: 126	Re: 67-72 partout I need a driver side door handle, the bracket that keeps the glove box from falling all the way open and the rear view mirror. Shipped to the frozen tundra! 54301 __________________ 1969 Chevy C/10 Stepside, Short Box. LQ4/4L80E swap in progress! (Donations being accepted!)

04-11-2020, 08:10 PM	#48
fastlane Registered User Join Date: Dec 2012 Location: Green Bay Wisconsin Posts: 126	Re: 67-72 partout Does it still have the factory radio? __________________ 1969 Chevy C/10 Stepside, Short Box. LQ4/4L80E swap in progress! (Donations being accepted!)



Register or Log In To remove these advertisements.

04-11-2020, 10:15 PM	#49
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,853	Re: 67-72 partout Maybe interested in the Dana 44 front axle if it's in good shape. Seeing it is a disc axle, is the truck a 72? Do you know what year the axle is? How about gear ratio? Any pictures of it? Thanks. __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

04-12-2020, 05:41 AM	#50
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,983	Re: 67-72 partout are the doors junk?

Register or Log In To remove these advertisements.