66 column shifter boot and handle questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

msg · 04-17-2020, 01:31 PM

Is there a replacement part for this boot? And does the black knob twist off or pull off?

**cwcarpenter98** · 04-17-2020, 01:45 PM

On my 63, the knob just pulls off. It's a fairly tight fit

msg · 04-17-2020, 02:52 PM

Thanks Christian, I'll give it a tug. Anyone found a replacement boot? I may have to reuse this cracked up one.

Southcity · 04-17-2020, 03:04 PM

Quote:

Originally Posted by msg

Thanks Christian, I'll give it a tug. Anyone found a replacement boot? I may have to reuse this cracked up one.

I'm amazed that you still have the boot, or part of it. It's difficult to tell from the pic if some of it has torn away over time. I *think* the part number is:

#26044259 GM Steering Column Shift Lever Seal/Boot

Searches for the above show some sites carry it but are out of stock. I have seen a similar replacement one from Dorman:
https://www.dormanproducts.com/p-75033-47102.aspx

Perhaps others will chime in with more info.

**The Rocknrod** · 04-17-2020, 03:18 PM

Truck Shop in Orange, CA has them.

msg · 04-17-2020, 03:42 PM

Quote:

Originally Posted by Southcity

I'm amazed that you still have the boot, or part of it. It's difficult to tell from the pic if some of it has torn away over time. I *think* the part number is:

#26044259 GM Steering Column Shift Lever Seal/Boot

Searches for the above show some sites carry it but are out of stock. I have seen a similar replacement one from Dorman:
https://www.dormanproducts.com/p-75033-47102.aspx

Perhaps others will chime in with more info.

Yeah the shape of the one I have assuming it's original looks so different from the others Ive seen. The dorman I think is for the floor though.

Quote:

Originally Posted by The Rocknrod

Truck Shop in Orange, CA has them.

Funny you should mention them, Ive been highlighting all the money Im going to spend with them in the catalog, but I didnt see a match. I saw floor shifter boots and a grommet. Ill try giving them a call.

Southcity · 04-17-2020, 04:09 PM

fyi: I gave The Truck Shop in Orange a call but they didn't have them nor the anti-rattle bushing for the tilt column shift lever.

It looks like Amazon has them:
https://www.amazon.com/Genuine-GM-26.../dp/B00GTJWWM0

**The Rocknrod** · 04-17-2020, 05:09 PM

https://67-72chevytrucks.com/vboard/...19&postcount=2

msg · 04-17-2020, 06:02 PM

Quote:

Originally Posted by Southcity

fyi: I gave The Truck Shop in Orange a call but they didn't have them nor the anti-rattle bushing for the tilt column shift lever.
It looks like Amazon has them:
https://www.amazon.com/Genuine-GM-26.../dp/B00GTJWWM0

Thanks for checking with them. I didnt know I needed that anti rattle bushing..more stuff to find.

Quote:

Originally Posted by The Rocknrod

https://67-72chevytrucks.com/vboard/...19&postcount=2

Thanks Rocknrod, that catalog looks like a match to what I have. Ill send an email to them to get a quote on shipping it to the states.

I wonder if that lever shim is the canadian version of the anti rattle bushing?

66x3 · 04-17-2020, 08:25 PM

Anybody know if you can put the old style 63-66 knob on the next generation 67-72 shift lever ? Newer style shaft looks bigger diameter but maybe not the part where the knob slips on?

Southcity · 04-18-2020, 11:37 AM

Quote:

Originally Posted by msg

I wonder if that lever shim is the Canadian version of the anti rattle bushing?

Not sure but it sure looks like that shim will help with shift lever rattle when driving rough roads. Keep us updated if you end up purchasing these parts.

Afirehawk1 · 04-23-2020, 10:07 AM

does someone make a replacement handle for a 66?
mine is all rusty but the rubber boot is perfect.

**The Rocknrod** · 04-23-2020, 10:36 AM

Quote:

Originally Posted by Afirehawk1

does someone make a replacement handle for a 66?
mine is all rusty but the rubber boot is perfect.

The Truck Shop in Orange, CA in the catalog I have it's page 66.

Afirehawk1 · 04-23-2020, 10:53 AM

Quote:

Originally Posted by The Rocknrod

The Truck Shop in Orange, CA in the catalog I have it's page 66.

thanks!

04-17-2020, 01:31 PM	#1
msg Registered User Join Date: Feb 2013 Location: GA Posts: 1,326	66 column shifter boot and handle questions Is there a replacement part for this boot? And does the black knob twist off or pull off? Attached Images __________________ Progress thread for my 66 http://67-72chevytrucks.com/vboard/s...d.php?t=623848

04-17-2020, 02:52 PM	#3
msg Registered User Join Date: Feb 2013 Location: GA Posts: 1,326	Re: 66 column shifter boot and handle questions Thanks Christian, I'll give it a tug. Anyone found a replacement boot? I may have to reuse this cracked up one. __________________ Progress thread for my 66 http://67-72chevytrucks.com/vboard/s...d.php?t=623848

04-17-2020, 03:18 PM	#5
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 66 column shifter boot and handle questions Truck Shop in Orange, CA has them. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-17-2020, 04:09 PM	#7
Southcity Registered User Join Date: Aug 2007 Location: Redwood City, CA Posts: 1,177	Re: 66 column shifter boot and handle questions fyi: I gave The Truck Shop in Orange a call but they didn't have them nor the anti-rattle bushing for the tilt column shift lever. It looks like Amazon has them: https://www.amazon.com/Genuine-GM-26.../dp/B00GTJWWM0 __________________ 66 GMC Suburban Custom 66 Chevy K10 Suburban Last edited by Southcity; 04-17-2020 at 04:28 PM.

04-17-2020, 05:09 PM	#8
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 66 column shifter boot and handle questions https://67-72chevytrucks.com/vboard/...19&postcount=2 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-17-2020, 01:45 PM	#2
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,492	Re: 66 column shifter boot and handle questions On my 63, the knob just pulls off. It's a fairly tight fit __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

04-17-2020, 08:25 PM	#10
66x3 Registered User Join Date: Dec 2018 Location: Bellevue, MI Posts: 118	Re: 66 column shifter boot and handle questions Anybody know if you can put the old style 63-66 knob on the next generation 67-72 shift lever ? Newer style shaft looks bigger diameter but maybe not the part where the knob slips on?

04-23-2020, 10:07 AM	#12
Afirehawk1 Registered User Join Date: Feb 2016 Location: Valrico, Florida Posts: 661	Re: 66 column shifter boot and handle questions does someone make a replacement handle for a 66? mine is all rusty but the rubber boot is perfect.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.