What can i use to replace my bed bolts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hard_Core_Hick · 06-22-2004, 11:39 PM

i need to know asap seeing my box is going back on some time next week and i was woundering what i could use for some fresh bed box bolts

kballan · 06-23-2004, 12:12 AM

Go to a local hardware store, they should be able to get you the proper size carriage bolts. I went to a Menards store, and got some no problem. I see that you're also in Canada - me too. I'm guessing that you don't have a Menards there. If you have an Ackland's/Grainger store there, they should be able to get 'em for you. If not, check out Canadian Tire. If all else fails, your GM dealer should be able to order them for you.

Hard_Core_Hick · 06-23-2004, 11:13 AM

my dad works at TIM BR Mart i might try there this afternoon or at work , i work at canadian tire , but thats what i thought just carrige bolts wasent too sure if they where anything special thanks

78SilveradoSWB · 06-23-2004, 12:09 PM

Spend a little more money and see if you can locate some stainless steel bolts, nuts, and washers, eliminate rusty bolts in the future.

06-22-2004, 11:39 PM	#1
Hard_Core_Hick Registered User Join Date: Apr 2003 Location: Canada Posts: 133	What can i use to replace my bed bolts i need to know asap seeing my box is going back on some time next week and i was woundering what i could use for some fresh bed box bolts __________________ I need a 454 4 barrel and dad wont let me get one

06-23-2004, 12:12 AM	#2
kballan Registered User Join Date: Jun 2003 Location: Fort Frances, Ontario, Canada Posts: 373	Go to a local hardware store, they should be able to get you the proper size carriage bolts. I went to a Menards store, and got some no problem. I see that you're also in Canada - me too. I'm guessing that you don't have a Menards there. If you have an Ackland's/Grainger store there, they should be able to get 'em for you. If not, check out Canadian Tire. If all else fails, your GM dealer should be able to order them for you. __________________ Kent Ballan ANY MAN CAN BUILD A TRUCK, BUT IT TAKES A REAL MAN TO CUT ONE UP!

06-23-2004, 11:13 AM	#3
Hard_Core_Hick Registered User Join Date: Apr 2003 Location: Canada Posts: 133	my dad works at TIM BR Mart i might try there this afternoon or at work , i work at canadian tire , but thats what i thought just carrige bolts wasent too sure if they where anything special thanks __________________ I need a 454 4 barrel and dad wont let me get one

06-23-2004, 12:09 PM	#4
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	Spend a little more money and see if you can locate some stainless steel bolts, nuts, and washers, eliminate rusty bolts in the future. __________________ Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.