CA 1982 C/30 front engine x-member to frame braces - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wbmoore · 04-18-2020, 10:39 PM

What I’m looking for are the two braces that go from the engine crossmember to the L and R sides of the frame. As you can see in the photo, the passenger side took a pretty good hit. I’d like to buy a pair but if only a passenger side is available...then I’ll take it.
Thanks. Brad Moore.

**The Rocknrod** · 04-22-2020, 08:53 AM

Are you needing this piece?

**Sheepdip** · 04-26-2020, 03:42 PM

I have both sides off a 86 should be the same. I'm 100 mi from you

wbmoore · 04-26-2020, 08:59 PM

Sheep dip......I found the braces but I need some other odds and ends. My truck is a ‘82 C30. I need both of the Swaybar Mounts for the frame. I need a right front fender. I need an inner fender....can’t remember which side. I need left and right inner fender plastic parts.
And probably other stuff too.
Thanks. Brad Moore.

**Sheepdip** · 04-26-2020, 10:05 PM

Quote:

Originally Posted by wbmoore

Sheep dip......I found the braces but I need some other odds and ends. My truck is a ‘82 C30. I need both of the Swaybar Mounts for the frame. I need a right front fender. I need an inner fender....can’t remember which side. I need left and right inner fender plastic parts.
And probably other stuff too.
Thanks. Brad Moore.

Can't help ya on anything else just had those left over from a 86 disc brake swap.
Glad you found your braces....one less item out of the way.

04-18-2020, 10:39 PM	#1
wbmoore Registered User Join Date: Jul 2001 Location: Big Bar, California Posts: 136	1982 C/30 front engine x-member to frame braces What I’m looking for are the two braces that go from the engine crossmember to the L and R sides of the frame. As you can see in the photo, the passenger side took a pretty good hit. I’d like to buy a pair but if only a passenger side is available...then I’ll take it. Thanks. Brad Moore. Attached Images __________________ 1967 GMC 3500 lwb dump flatbed project 1969 GMC 2500 1979 GMC 7000 fire crew truck w/water pumps 1982 C/30 Cummins NV5600 Crew Cab project

04-22-2020, 08:53 AM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 1982 C/30 front engine x-member to frame braces Are you needing this piece? Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-26-2020, 03:42 PM	#3
Sheepdip Senior Member Join Date: Nov 2018 Location: Waterford California Posts: 2,625	Re: 1982 C/30 front engine x-member to frame braces I have both sides off a 86 should be the same. I'm 100 mi from you

04-26-2020, 08:59 PM	#4
wbmoore Registered User Join Date: Jul 2001 Location: Big Bar, California Posts: 136	Re: 1982 C/30 front engine x-member to frame braces Sheep dip......I found the braces but I need some other odds and ends. My truck is a ‘82 C30. I need both of the Swaybar Mounts for the frame. I need a right front fender. I need an inner fender....can’t remember which side. I need left and right inner fender plastic parts. And probably other stuff too. Thanks. Brad Moore. __________________ 1967 GMC 3500 lwb dump flatbed project 1969 GMC 2500 1979 GMC 7000 fire crew truck w/water pumps 1982 C/30 Cummins NV5600 Crew Cab project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.