|
05-12-2020, 09:53 PM
|
#1 |
|
Registered User
Join Date: Sep 2015
Location: Saskatoon, SK - Canada
Posts: 296
|
Sway bar bushings
So, I got my hands on a later 70’s sway bar and spring caps from wrecker. Bought new bushings. However, I can’t find anyone in town to push the new ones into place. They’ve been trying with a press but no luck. They’ve phoned around and no one seems to have the tool or machine to do this anymore? Any suggestions?
Posted via Mobile Device |
|
|
|
05-13-2020, 12:01 AM
|
#2 |
|
Registered User
Join Date: May 2000
Location: Petrolia,Ontario,Canada but working in Port Huron,Mi.
Posts: 1,772
|
Re: Sway bar bushings
Are you talking about the ones that go in the ends of the sway bar?
Like here?   I used a 2 piece urethane bushing. One half in on one side, the other half in through the other side. .
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE |
|
|
|
|
05-13-2020, 12:15 AM
|
#3 |
|
Registered User
Join Date: May 2000
Location: Petrolia,Ontario,Canada but working in Port Huron,Mi.
Posts: 1,772
|
Re: Sway bar bushings
You could freeze the bushings over night then when you go to install...lube the hell out of everything and press them in.
Some reddy rod or large bolt and 2 sockets, one the same size as the bushing and one slightly larger than the orafic the bushing is being pressed into. Thread the reddy rod through the center of everything and tighten away. "should" press in.
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE |
|
|
|
|
05-13-2020, 12:58 AM
|
#4 | |
|
Registered User
Join Date: Sep 2015
Location: Saskatoon, SK - Canada
Posts: 296
|
Re: Sway bar bushings
Quote:
|
|
|
|
|
|
05-13-2020, 12:59 AM
|
#5 | |
|
Registered User
Join Date: Sep 2015
Location: Saskatoon, SK - Canada
Posts: 296
|
Re: Sway bar bushings
Quote:
|
|
|
|
|
|
05-13-2020, 07:08 AM
|
#6 |
|
Special Order
  
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: Sway bar bushings
A spring shop can't deal with bushings anymore?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
|
05-13-2020, 10:59 PM
|
#7 | |
|
Registered User
Join Date: May 2000
Location: Petrolia,Ontario,Canada but working in Port Huron,Mi.
Posts: 1,772
|
Re: Sway bar bushings
Quote:
 Anyway this is what I have. https://www.summitracing.com/search/...eyword=3.5118r 
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
