|
05-21-2020, 03:43 AM
|
#1 |
|
Registered User
 
Join Date: May 2006
Location: Yucaipa, Calif.
Posts: 790
|
K1500 front hubs
I have two non-ABS K-type hubs (used) that I swapped out many years ago. The reason I replaced them was preventative maintenance because I had a problem with the front axle shafts. The axle shafts were flinging grease past the seals for a long time so I replaced both sides at the time. The hubs still spin smoothly by hand and I don't detect any problem with them other than the visual view of the parts. They're GM Timken bearing hubs and I think there's still a few miles left in them if someone needs budget replacements. I was thinking maybe $100 shipped?
__________________
1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C |
|
|
|
05-21-2020, 03:45 AM
|
#2 |
|
Registered User
Join Date: May 2006
Location: Yucaipa, Calif.
Posts: 790
|
Re: K1500 front hubs
Pics of the hubs
__________________
1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
