Damn blazer emblem's... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FRENCHBLUE72** · 06-15-2004, 12:07 AM

All I wanted to do today was put on my blazer fender emblem's but it could never be that easy .... 1ST I tried to just remove the inner fender to reach the bolt's no such luck... So I ened up tearing the whole front clip off the passenger side jusy to replace the emblem... As soon as the fender was off is when i started to run into problem's the whole core support was cracked and the lower hinge plate was gone.... Here are a few pic's of what I got done hope to get the driver's side done teusday...

**FRENCHBLUE72** · 06-15-2004, 12:21 AM

More pic's of my day and a pic of my rivit's that someone replaced with a cool washer/nut/bolt combo stupid p.o.

**Yukon Jack** · 06-15-2004, 09:36 AM

Lot of work, but you gotta have the K5 emblems - they are my favorites by far. Good to get that repair done too.

**FRENCHBLUE72** · 06-15-2004, 10:20 AM

Yep gonna start the driver's side here in about 30 minutes I love vacation only 5 day's left...

bouncytruck · 06-15-2004, 11:17 AM

I've got to put the emblems on my '69. I tried the inner fender idea too, but gave up when my hand was too fat to fit!

Southern Rebel · 06-25-2004, 03:49 PM

I just got my first set of blazer emblems. What do you use to make them stay in? SuperGlue or Ducttape

Big J · 06-25-2004, 04:03 PM

Lookin' good. Keep the pics comin'.

1970blazin · 06-25-2004, 04:51 PM

Southern Rebel,
The blazer emblems have a "capture nut" that screws on the posts on the back of the emblem.

Southern Rebel · 06-25-2004, 04:55 PM

Can these be picked up from a autoparts store? 1970blazin have you finished your Blazer yet? The last pics I seen just looks awesome

**FRENCHBLUE72** · 06-25-2004, 05:13 PM

I would think you could get the captured nut in the help section of any auto part's store ,but you may have to visit an autobody paint store to get em..

06-15-2004, 12:07 AM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,592	Damn blazer emblem's... All I wanted to do today was put on my blazer fender emblem's but it could never be that easy .... 1ST I tried to just remove the inner fender to reach the bolt's no such luck... So I ened up tearing the whole front clip off the passenger side jusy to replace the emblem... As soon as the fender was off is when i started to run into problem's the whole core support was cracked and the lower hinge plate was gone.... Here are a few pic's of what I got done hope to get the driver's side done teusday... Attached Images Last edited by FRENCHBLUE72; 06-15-2004 at 12:14 AM.

06-15-2004, 12:21 AM	#2
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,592	More pic's of my day and a pic of my rivit's that someone replaced with a cool washer/nut/bolt combo stupid p.o. Attached Images

06-15-2004, 09:36 AM	#3
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Lot of work, but you gotta have the K5 emblems - they are my favorites by far. Good to get that repair done too. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

06-15-2004, 11:17 AM	#5
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	I've got to put the emblems on my '69. I tried the inner fender idea too, but gave up when my hand was too fat to fit! __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

06-25-2004, 03:49 PM	#6
Southern Rebel 70' blazer Join Date: Apr 2004 Location: Durham, NC Posts: 71	emblem??? I just got my first set of blazer emblems. What do you use to make them stay in? SuperGlue or Ducttape

06-15-2004, 10:20 AM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,592	Yep gonna start the driver's side here in about 30 minutes I love vacation only 5 day's left...

06-25-2004, 04:03 PM	#7
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Lookin' good. Keep the pics comin'. __________________ BAZINGA! My Build

06-25-2004, 04:51 PM	#8
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	Southern Rebel, The blazer emblems have a "capture nut" that screws on the posts on the back of the emblem. __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

06-25-2004, 04:55 PM	#9
Southern Rebel 70' blazer Join Date: Apr 2004 Location: Durham, NC Posts: 71	Thanks Can these be picked up from a autoparts store? 1970blazin have you finished your Blazer yet? The last pics I seen just looks awesome

06-25-2004, 05:13 PM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,592	I would think you could get the captured nut in the help section of any auto part's store ,but you may have to visit an autobody paint store to get em..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.