Wiring Specialist Needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gary5212 · 06-10-2020, 10:25 PM

Hello

I am in the middle of a project with my dad, but regrettably he passed away. He was a wiring genius, there wasn't nothing that he couldn't wire up. Anyway I am not as good with wiring and needing help with the wiring and building wiring harnesses. So I am asking the forum if they might know someone that would be as good to conference with and pay for helping.

Thanks in advance

**mongocanfly** · 06-10-2020, 10:45 PM

sorry for your loss..
if your really wanting to go down that path as a career, id suggest a finding a good E&C school
if your just wanting to do 1 project, id suggest getting a replacement harness...it takes all the guess work out of it..and still lets you do the connections
much easier than trying to build from scratch...
but theres some guys on here that love wiring...not me...I hate it
good luck

**MikeB** · 06-11-2020, 03:32 AM

What year is your truck? And is the entire original harness removed?

06-10-2020, 10:25 PM	#1
gary5212 Registered User Join Date: Dec 2015 Location: Nebraska Posts: 1	Wiring Specialist Needed Hello I am in the middle of a project with my dad, but regrettably he passed away. He was a wiring genius, there wasn't nothing that he couldn't wire up. Anyway I am not as good with wiring and needing help with the wiring and building wiring harnesses. So I am asking the forum if they might know someone that would be as good to conference with and pay for helping. Thanks in advance

06-10-2020, 10:45 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: Wiring Specialist Needed sorry for your loss.. if your really wanting to go down that path as a career, id suggest a finding a good E&C school if your just wanting to do 1 project, id suggest getting a replacement harness...it takes all the guess work out of it..and still lets you do the connections much easier than trying to build from scratch... but theres some guys on here that love wiring...not me...I hate it good luck __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

06-11-2020, 03:32 AM	#3
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	Re: Wiring Specialist Needed What year is your truck? And is the entire original harness removed? __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.