|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-12-2020, 09:41 PM
|
#1 |
|
Registered User
Join Date: Oct 2012
Location: Tehachapi Ca.
Posts: 29
|
Is it as easy as just swapping out rotors
I picked up a 67 C10. The truck has already been converted to four wheel disc brakes, but the problem is it’s still six lug. I would like to convert it to five lug. Is it as easy as just swapping out the rotors?
|
|
|
|
06-12-2020, 10:15 PM
|
#2 |
|
Registered User
Join Date: Jul 2012
Location: Whitehorse yukon
Posts: 1,218
|
Re: Is it as easy as just swapping out rotors
On the front end yes rear end will need new axles or have the holes welded up and machine out 5 bolt pattern
|
|
|
|
|
06-12-2020, 10:28 PM
|
#3 |
|
Registered User
Join Date: Jun 2013
Location: Somewhere
Posts: 3,128
|
Re: Is it as easy as just swapping out rotors
I think the fronts needs new spindles at least.
|
|
|
|
|
06-12-2020, 10:35 PM
|
#4 |
|
Registered User
Join Date: Oct 2012
Location: Tehachapi Ca.
Posts: 29
|
Re: Is it as easy as just swapping out rotors
It has the CPP disc brake kit with 2 inch drop spindles. Does that make a difference?
|
|
|
|
|
06-12-2020, 10:36 PM
|
#5 |
|
Registered User
Join Date: Oct 2012
Location: Tehachapi Ca.
Posts: 29
|
Re: Is it as easy as just swapping out rotors
I have a couple sets of 71-72 spindles, calipers and rotors but I was hoping to keep the drop spindles.
|
|
|
|
|
06-12-2020, 10:51 PM
|
#6 |
|
Senior Member
 
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,975
|
Re: Is it as easy as just swapping out rotors
If it were me, I would call CPP and ask if their 6 and 5 lug disk kits use the same spindle - rather than make a decision based on our guesses.
|
|
|
|
|
06-12-2020, 10:54 PM
|
#7 |
|
Registered User
Join Date: Oct 2012
Location: Tehachapi Ca.
Posts: 29
|
Re: Is it as easy as just swapping out rotors
That’s what I’ll end up doing I guess. Sometimes it’s harder to get anybody on the line at CPP than get answers from the forum.
|
|
|
|
|
06-12-2020, 11:01 PM
|
#8 |
|
Registered User
Join Date: Oct 2012
Location: Tehachapi Ca.
Posts: 29
|
Re: Is it as easy as just swapping out rotors
That’s what I’ll end up doing I guess. Sometimes it’s harder to get anybody on the line at CPP than get answers from the forum.
|
|
|
|
|
06-12-2020, 11:07 PM
|
#9 |
|
67-72 parts collector,…
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,701
|
Re: Is it as easy as just swapping out rotors
Should be a straight swap to 5-lug rotors if you have the CPP spindles on there now.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
|
|
|
|
06-15-2020, 04:37 PM
|
#10 |
|
Registered User
Join Date: Oct 2012
Location: Tehachapi Ca.
Posts: 29
|
Re: Is it as easy as just swapping out rotors
OK thanks. I can’t seem to get anybody on the phone at CPP. All I can do is leave a message.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
