exhaust question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

franko72 · 06-26-2004, 05:07 PM

The 72 truck I have has a BB 402 with midas factory dual exhaust all the way to back about 6 years old. I would like for it to sound a little meaner but dont want to install headers(cost). Would it be too loud if I eliminated the big fac. style mufflers and installed straight pipes in thier place or put glass pack cherry bomb style mufflers in place of the big quiet mufflers.Still would have the duals piped all the way to the back.need advice

Tx Firefighter · 06-26-2004, 05:48 PM

Sure, a higher flow muffler set will wake up the sound.

It would be a good solution. You'll get to keep all of your existing dual system and just splice in some louder mufflers. It will be a quick, easy job for any muffler shop to do.

Ask around about some trucks you hear that you like the sound of. Everyone has their own preference as to what sounds best. Some fellows like Flowmasters, some Dynomax, Hooker, Magnaflow, etc....

cdowns · 06-26-2004, 05:50 PM

a 6year old exhaust system?? if it's alive and in one piece i'd leave it alone becayse if you start disturbing it the next thing you know is you're replacing the whole damn thing

thisolechevy · 06-26-2004, 05:57 PM

I did that to my friends truck I installed 2 flowmaster 40 series and they sound mean!! but they don't drone at all at highway speeds

franko72 · 06-26-2004, 08:10 PM

anyone trying only straight pipes from the manifold all the way back?

jhow66 · 06-26-2004, 08:16 PM

Quote:

Originally Posted by franko72

anyone trying only straight pipes from the manifold all the way back?

You will be sorry if you try it and lighter in the billfold (tickets)

Robert1970C20rstbukt · 06-26-2004, 09:19 PM

Straight pipes are loud as hell, I'll tell you that. I fired mine up with nothing but the y pipe that stopped at the carrier bearing and the whole truck was literally shaking because it was so loud.

I pissed off a lot of neighbors, too, 'cause I did that around 10:30 at night.

I've got a cherrybomb glasspack at the end till I can get duals on it and it sounds sweet, even with the stock exhaust pipe setup.

crazy longhorn · 06-26-2004, 10:13 PM

Dyno max superturbos are a reasonably priced, good flowing muffler(14" body). for about 35 a pop through summit or jegs, then you add a set of 3 1/2 x 16 " chrome or stainless cans at the rear & you will have a nice sound. best of luck,crazyL

06-26-2004, 05:07 PM	#1
franko72 Franko72 Join Date: May 2004 Location: Cincinnati,Ohio Posts: 471	exhaust question The 72 truck I have has a BB 402 with midas factory dual exhaust all the way to back about 6 years old. I would like for it to sound a little meaner but dont want to install headers(cost). Would it be too loud if I eliminated the big fac. style mufflers and installed straight pipes in thier place or put glass pack cherry bomb style mufflers in place of the big quiet mufflers.Still would have the duals piped all the way to the back.need advice __________________ 1972 C20 cheyenne Super 402 BB/400 turbo LWB A/C Tilt, Cruise Control, Saddle tanks, Tach My Home Page Better to burn out than it is to rust

06-26-2004, 05:48 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Sure, a higher flow muffler set will wake up the sound. It would be a good solution. You'll get to keep all of your existing dual system and just splice in some louder mufflers. It will be a quick, easy job for any muffler shop to do. Ask around about some trucks you hear that you like the sound of. Everyone has their own preference as to what sounds best. Some fellows like Flowmasters, some Dynomax, Hooker, Magnaflow, etc.... __________________ I'm on the Instagram- @Gearhead_Kevin

06-26-2004, 05:50 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	a 6year old exhaust system?? if it's alive and in one piece i'd leave it alone becayse if you start disturbing it the next thing you know is you're replacing the whole damn thing __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-26-2004, 05:57 PM	#4
thisolechevy Registered User Join Date: Jun 2004 Location: Gainesville, Fl Posts: 382	I did that to my friends truck I installed 2 flowmaster 40 series and they sound mean!! but they don't drone at all at highway speeds __________________ Man I need another 67-72!!!

06-26-2004, 08:10 PM	#5
franko72 Franko72 Join Date: May 2004 Location: Cincinnati,Ohio Posts: 471	anyone trying only straight pipes from the manifold all the way back? __________________ 1972 C20 cheyenne Super 402 BB/400 turbo LWB A/C Tilt, Cruise Control, Saddle tanks, Tach My Home Page Better to burn out than it is to rust

06-26-2004, 09:19 PM	#7
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Straight pipes are loud as hell, I'll tell you that. I fired mine up with nothing but the y pipe that stopped at the carrier bearing and the whole truck was literally shaking because it was so loud. I pissed off a lot of neighbors, too, 'cause I did that around 10:30 at night. I've got a cherrybomb glasspack at the end till I can get duals on it and it sounds sweet, even with the stock exhaust pipe setup. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

06-26-2004, 10:13 PM	#8
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Dyno max superturbos are a reasonably priced, good flowing muffler(14" body). for about 35 a pop through summit or jegs, then you add a set of 3 1/2 x 16 " chrome or stainless cans at the rear & you will have a nice sound. best of luck,crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.