'72 350 Upper Engine Wire Looms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rich72C10 · 06-18-2020, 10:01 AM

Hi All -

While I have ordered/received the lower parts of the wire looms and shields from GMCPauls Truck Parts, the two upper ones do not seem to be available anywhere. I have a number of original Chevrolet/GMC 72 shop/maintenance manuals - which is where I found all the loom bits (page attached) to go original.

Might anyone know where I can find these two items?

Willys_MB · 06-18-2020, 11:01 AM

They come up on the board every once in a while. Check ebay, too. I just got a set a few weeks ago on the board here for ~$20 shipped

Rich72C10 · 06-18-2020, 11:22 AM

do you have a good way of searching for these two items? Just upper looms?

**NGN** · 06-18-2020, 11:36 AM

Keep in mind, if you have power brakes you'll need that taller bracket, the left side one, to have the hole in it for the passage of the power brake booster vacuum hose to passthrough and hook up to the vacuum fitting on the manifold, ouch that hurt. I think that's the only stock way to install, but I could be wrong things can be changed.

Rich72C10 · 06-18-2020, 11:40 AM

yep, I have power brakes! I am thinking, perhaps, this site has them - https://www.rickscamaros.com/

They speak of these as "Towers" and also refer to a tower with power brakes... going to email them, with the photo I have from my manual.

Willys_MB · 06-18-2020, 02:02 PM

Quote:

Originally Posted by Rich72C10

do you have a good way of searching for these two items? Just upper looms?

Honestly, I just check the parts board a few times a day. They're usually called spark plug wire brackets. You can also find them on eBay, which I'll probably do if I need another set. You can get them for a few dollars more and they're powder coated chevy orange or black with new rubber retainers.

https://www.ebay.com/itm/69-Camaro-S...-/392563473590

Rich72C10 · 06-18-2020, 02:21 PM

Thank you for that, you are the best!

06-18-2020, 10:01 AM	#1
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	'72 350 Upper Engine Wire Looms Hi All - While I have ordered/received the lower parts of the wire looms and shields from GMCPauls Truck Parts, the two upper ones do not seem to be available anywhere. I have a number of original Chevrolet/GMC 72 shop/maintenance manuals - which is where I found all the loom bits (page attached) to go original. Might anyone know where I can find these two items? Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

06-18-2020, 11:01 AM	#2
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: '72 350 Upper Engine Wire Looms They come up on the board every once in a while. Check ebay, too. I just got a set a few weeks ago on the board here for ~$20 shipped __________________ 1968 GMC C2500 Long Bed Fleetside

06-18-2020, 11:22 AM	#3
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: '72 350 Upper Engine Wire Looms do you have a good way of searching for these two items? Just upper looms? __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

06-18-2020, 11:36 AM	#4
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 838	Re: '72 350 Upper Engine Wire Looms Keep in mind, if you have power brakes you'll need that taller bracket, the left side one, to have the hole in it for the passage of the power brake booster vacuum hose to passthrough and hook up to the vacuum fitting on the manifold, ouch that hurt. I think that's the only stock way to install, but I could be wrong things can be changed.

06-18-2020, 11:40 AM	#5
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: '72 350 Upper Engine Wire Looms yep, I have power brakes! I am thinking, perhaps, this site has them - https://www.rickscamaros.com/ They speak of these as "Towers" and also refer to a tower with power brakes... going to email them, with the photo I have from my manual. __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

06-18-2020, 02:21 PM	#7
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: '72 350 Upper Engine Wire Looms Thank you for that, you are the best! __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.