Windshield washer not pumping water.. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Linus6129 · 08-09-2014, 08:27 PM

Oh yeah, run some new hoses to the washer nozzles

Linus6129 · 08-09-2014, 08:34 PM

I think the next thing I need us a reservoir that will actually hold something more than a pee squirt. Maybe something from a ford van or something.

Lee H · 08-10-2014, 05:34 PM

Mid 90s C/K1500. Very easy mod, about $5 bucks at your local pick a part.

davepl · 08-10-2014, 06:03 PM

If you're not worried about originality, go with what the others have said above. I particularly like the S10 jug approach (if not described above, it's common, search for it).

I'm about to remove my entire center stack or whatever it takes in an AC cab truck because my brand new one isn't working either.

They really put these motor/pump units in an asinine place. I think in '73 (or by the 80s anyway) they went to the engine side of the firewall finally.

I guess at least it's a vacuum operated system!

**truckster** · 08-10-2014, 06:14 PM

The S10 pump/bottle is a great, cheap, and easy mod that will work really well.

*JonnyC10* · 08-10-2014, 07:29 PM

I used an Anco pump and hooked the red up to the yellow wire and the black to the middle wire on this switch and it doesn't work. I know the pump works because I tested it.

nyncompute · 08-10-2014, 08:10 PM

I always have the internal battle between using original parts vs. convenience/efficiency. Ive found those original washer units to be extremely fussy and prone to fail (x3). If another one s**ts the bed, I'm not digging behind the dash horror show again and removing all the a/c crud etc. Going with a newer style unit.

Linus6129 · 08-10-2014, 08:52 PM

Jonnyc10 I sent you a private message. Use the harness at the pump, not the switch.

Linus6129 · 08-10-2014, 08:57 PM

I will get one of those 90s c/k 1500 tanks for sure. Thanks for the info.

*JonnyC10* · 08-10-2014, 09:19 PM

I got it. Will give it a try. Thanks.

Johnc2712 · 06-18-2020, 02:18 PM

To Linus6129
I'm sorry, but I'm not following you. My 68 Chevy C10 wiper/washer motor has one terminal with a light blue and Yellow wire that the yellow wire also jumps to another connector that has a dark blue wire. There is also another single connector with a black wire. Are you saying 1 of this wires is a switched ground wire that I can run to my new electric pump? When I put a meter on the black wire terminal I have voltage that fluctuates with the motion of the wiper.

Rich72C10 · 06-18-2020, 03:07 PM

So if you put one of these newer external pump jugs in (like the Mid 90s C/K1500) do you have to dig in the dash and bypass the old pump water lines? I get you need to re-route the power lines.

67C10Step · 06-19-2020, 09:43 AM

Quote:

Originally Posted by Rich72C10

So if you put one of these newer external pump jugs in (like the Mid 90s C/K1500) do you have to dig in the dash and bypass the old pump water lines? I get you need to re-route the power lines.

Yes, if the pump is directly attached to the jug you will no longer have a suction line but you will need to re-route new discharge lines from the pump to your nozzles. Probably needs to be done anyway as most of the time the lines are hard and/or cracked. I think the hose size is 5/32" and available at most auto parts stores.

Rich72C10 · 06-19-2020, 11:12 AM

thx for confirming - I pretty much expected that answer.

08-09-2014, 08:27 PM	#26
Linus6129 Registered User Join Date: Jul 2014 Location: Methuen MA Posts: 8	Re: Windshield washer not pumping water.. Oh yeah, run some new hoses to the washer nozzles

08-09-2014, 08:34 PM	#27
Linus6129 Registered User Join Date: Jul 2014 Location: Methuen MA Posts: 8	Re: Windshield washer not pumping water.. I think the next thing I need us a reservoir that will actually hold something more than a pee squirt. Maybe something from a ford van or something.

08-10-2014, 05:34 PM	#28
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: Windshield washer not pumping water.. Mid 90s C/K1500. Very easy mod, about $5 bucks at your local pick a part. Attached Images __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

08-10-2014, 06:03 PM	#29
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Windshield washer not pumping water.. If you're not worried about originality, go with what the others have said above. I particularly like the S10 jug approach (if not described above, it's common, search for it). I'm about to remove my entire center stack or whatever it takes in an AC cab truck because my brand new one isn't working either. They really put these motor/pump units in an asinine place. I think in '73 (or by the 80s anyway) they went to the engine side of the firewall finally. I guess at least it's a vacuum operated system! __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

08-10-2014, 06:14 PM	#30
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,976	Re: Windshield washer not pumping water.. The S10 pump/bottle is a great, cheap, and easy mod that will work really well.

08-10-2014, 07:29 PM	#31
JonnyC10 Account Suspended Join Date: Jul 2014 Location: NH Posts: 280	Re: Windshield washer not pumping water.. I used an Anco pump and hooked the red up to the yellow wire and the black to the middle wire on this switch and it doesn't work. I know the pump works because I tested it.

08-10-2014, 08:10 PM	#32
nyncompute Registered User Join Date: Nov 2004 Location: Southern Nevada Posts: 532	Re: Windshield washer not pumping water.. I always have the internal battle between using original parts vs. convenience/efficiency. Ive found those original washer units to be extremely fussy and prone to fail (x3). If another one s**ts the bed, I'm not digging behind the dash horror show again and removing all the a/c crud etc. Going with a newer style unit. __________________ 1972 K-10 SWB Cheyenne

08-10-2014, 08:52 PM	#33
Linus6129 Registered User Join Date: Jul 2014 Location: Methuen MA Posts: 8	Re: Windshield washer not pumping water.. Jonnyc10 I sent you a private message. Use the harness at the pump, not the switch.

08-10-2014, 08:57 PM	#34
Linus6129 Registered User Join Date: Jul 2014 Location: Methuen MA Posts: 8	Re: Windshield washer not pumping water.. I will get one of those 90s c/k 1500 tanks for sure. Thanks for the info.

08-10-2014, 09:19 PM	#35
JonnyC10 Account Suspended Join Date: Jul 2014 Location: NH Posts: 280	Re: Windshield washer not pumping water.. I got it. Will give it a try. Thanks.

06-18-2020, 02:18 PM	#36
Johnc2712 Registered User Join Date: Jul 2018 Location: Chesapeake, Va Posts: 3	Re: Windshield washer not pumping water.. To Linus6129 I'm sorry, but I'm not following you. My 68 Chevy C10 wiper/washer motor has one terminal with a light blue and Yellow wire that the yellow wire also jumps to another connector that has a dark blue wire. There is also another single connector with a black wire. Are you saying 1 of this wires is a switched ground wire that I can run to my new electric pump? When I put a meter on the black wire terminal I have voltage that fluctuates with the motion of the wiper. Last edited by Johnc2712; 06-18-2020 at 02:24 PM.

06-18-2020, 03:07 PM	#37
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: Windshield washer not pumping water.. So if you put one of these newer external pump jugs in (like the Mid 90s C/K1500) do you have to dig in the dash and bypass the old pump water lines? I get you need to re-route the power lines. __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

06-19-2020, 11:12 AM	#39
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: Windshield washer not pumping water.. thx for confirming - I pretty much expected that answer. __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.