47-55.1 LS Swap Drive by Wire Throttle Pedal Mounting Help in a '54

[joedoh]

Originally Posted by dsraven

if you find the throttle is twitchy or a little hard to keep a constant, like a little pedal movement makes a big difference and makes it a challenge to cruise, you may have to lengthen the pedal lever a bit. a longer lever arm would mean more pedal movement for the same amount of

once upon a time I put CBR 600F4i throttle bodies on a 4 cylinder engine and didnt lengthen the throttle arm where the cable attached. the bike throttle was 1/4 turn so hooking the truck pedal up had like 1 1/2" travel between idle and WOT, it was like an ON/OFF switch