Lower steering column cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72velle · 07-07-2020, 09:26 AM

I closed the door on my 84 C10 and heard a pop. I looked down and saw that one the lower steering column cover screws had finally worn out the plastic and popped. I know it's 36 year old plastic. Does anyone have one laying around or can you recommend a vendor that sells one that fits?
TIA!

Kevin

**TKCR** · 07-07-2020, 09:52 AM

Quote:

Originally Posted by 72velle

I closed the door on my 84 C10 and heard a pop. I looked down and saw that one the lower steering column cover screws had finally worn out the plastic and popped. I know it's 36 year old plastic. Does anyone have one laying around or can you recommend a vendor that sells one that fits?
TIA!

Kevin

The screw actually tightens into the metal, on the dash.

72velle · 07-07-2020, 11:19 AM

I guess it has just been enlarged over the years. The head of the screw should still be outside of the cover, correct?

Ziegelsteinfaust · 07-07-2020, 12:29 PM

I believe it is the black abs glue can be used to fix the panel if you have some.

Pontiac1976 · 07-07-2020, 05:30 PM

Hi well it it the black screws there just dash screws phillips head think there 1"-1/2" and they is a U nut that the screws in to. LMC sell them all or any body hardware supply shop will have them, Scrap yard.

07-07-2020, 09:26 AM	#1
72velle Registered User Join Date: Jul 2018 Location: Bluffton, SC Posts: 59	Lower steering column cover I closed the door on my 84 C10 and heard a pop. I looked down and saw that one the lower steering column cover screws had finally worn out the plastic and popped. I know it's 36 year old plastic. Does anyone have one laying around or can you recommend a vendor that sells one that fits? TIA! Kevin

07-07-2020, 11:19 AM	#3
72velle Registered User Join Date: Jul 2018 Location: Bluffton, SC Posts: 59	Re: Lower steering column cover I guess it has just been enlarged over the years. The head of the screw should still be outside of the cover, correct?

07-07-2020, 12:29 PM	#4
Ziegelsteinfaust Registered User Join Date: Dec 2012 Location: Temple City Posts: 3,635	Re: Lower steering column cover I believe it is the black abs glue can be used to fix the panel if you have some.

07-07-2020, 05:30 PM	#5
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 769	Re: Lower steering column cover Hi well it it the black screws there just dash screws phillips head think there 1"-1/2" and they is a U nut that the screws in to. LMC sell them all or any body hardware supply shop will have them, Scrap yard. __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.