K10 Exhaust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Southcity · 07-08-2020, 02:12 PM

If you have the work done and run dual exhaust, adding an H pipe will give you that nice mellow exterior sound and help evacuate exhaust gasses. Don't forget the type of exhaust hangers used will make a huge difference on interior noise and exhaust drone. You'll want exhaust hangers that have a good rubber isolator (i.e. j-hook style works well).

ManNamedJed · 07-08-2020, 02:56 PM

I did 2.5 rams horns and 2.5 pipe into one muffler with a 3" exit on mine. The shop put a short little magnaflow on it at first and I hated the loud sound, so they swapped it.

There are pics on page 3 of my thread:
http://67-72chevytrucks.com/vboard/s...=790815&page=3

07-08-2020, 02:12 PM	#1
Southcity Registered User Join Date: Aug 2007 Location: Redwood City, CA Posts: 1,184	Re: K10 Exhaust If you have the work done and run dual exhaust, adding an H pipe will give you that nice mellow exterior sound and help evacuate exhaust gasses. Don't forget the type of exhaust hangers used will make a huge difference on interior noise and exhaust drone. You'll want exhaust hangers that have a good rubber isolator (i.e. j-hook style works well). __________________ 66 GMC Suburban Custom 66 Chevy K10 Suburban

07-08-2020, 02:56 PM	#2
ManNamedJed Registered User Join Date: May 2018 Location: Reno, NV Posts: 232	Re: K10 Exhaust I did 2.5 rams horns and 2.5 pipe into one muffler with a 3" exit on mine. The shop put a short little magnaflow on it at first and I hated the loud sound, so they swapped it. There are pics on page 3 of my thread: http://67-72chevytrucks.com/vboard/s...=790815&page=3



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.