Truck load of Parts f/s axles, tranny... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stelth2002 · 03-31-2004, 04:54 PM

Botbot i sent you a PM.

*botboy* · 04-01-2004, 02:44 AM

sent back and bump for you - oops didn't notice clutch was sold. My bad.

RIDDLA · 05-08-2004, 06:56 PM

do you have a yoke for the rear? ?

stelth2002 · 05-10-2004, 08:55 PM

Riddla, I do have a rear yoke and its yours if you send me a PM.

EVERYONE ELSE,

These are some parts i have left and will be able to ship them and need to get rid of them soon. I have cut the prices to about half what they were before.

Passenger side Ramhorn 2wd v8 manifold(has been repair welded and doesnt leak) 8$
9 inch tailhousing & tailshaft for a t350 (good shape) 13$

1 set of 3 point mirrors ( has good glass, some surface rust) 8$

2 - 2wd steering boxes. (non-power, worked, had some play, will include good pitman arm) 10$

2 - windsheild wiper assemblies(includes the wiper arm and blade, worked and look great) 10/set
67-68 ebrake setup for cab. Includes everything you need to mount it under steering wheel, works $20
2 taillight housing (doesnt include the wiring) 5 a piece
1 set of door hinges 8/set
1 washer bottle and bracket and lid 4

GMC horn cover(aluminum, good shape, no scraches) 10$
Heater control ( 1 broken lever, aluminum face, tight) 20$

Flywheel for SBC except 400. (got lots of metal to it, not turned, new. Has 100miles on it) 50$ / Best offer?

hugger orange glove box door( driver quality) 10$

Inspector722 · 06-28-2004, 05:31 PM

Do you have the passenger fender for a 67?

stelth2002 · 06-28-2004, 11:23 PM

I dont have a passenger, but i do have a driver fender. I still have all the parts in the list above. I also have a factory manual tranny, 5 ralley rims that are 6 lug, a gas tank and sender, and other smaller parts. Just ask and you can name your price if its fair. JT

03-31-2004, 04:54 PM	#26
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Botbot i sent you a PM. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

05-08-2004, 06:56 PM	#28
RIDDLA Registered User Join Date: Aug 2002 Location: Santa Fe NM Posts: 393	do you have a yoke for the rear? ? __________________ 68 GMC-Stripshow 70 Chevy Monte Carlo 72 Chevy Monte Carlo LOLO 72 Chevy Suburban Blurban 74 Vw Bug 78 Chevy k10 lwb 78 Chevy k10 swb 03 Cadillac Escalade-Duecesix 84 Cadillac Coupe Deville DeElegance B.O. A Lifestyle Money Cant Buy! Win,Lose, or Tie I'm a Raider till i die

05-10-2004, 08:55 PM	#29
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Riddla, I do have a rear yoke and its yours if you send me a PM. EVERYONE ELSE, These are some parts i have left and will be able to ship them and need to get rid of them soon. I have cut the prices to about half what they were before. Passenger side Ramhorn 2wd v8 manifold(has been repair welded and doesnt leak) 8$ 9 inch tailhousing & tailshaft for a t350 (good shape) 13$ 1 set of 3 point mirrors ( has good glass, some surface rust) 8$ 2 - 2wd steering boxes. (non-power, worked, had some play, will include good pitman arm) 10$ 2 - windsheild wiper assemblies(includes the wiper arm and blade, worked and look great) 10/set 67-68 ebrake setup for cab. Includes everything you need to mount it under steering wheel, works $20 2 taillight housing (doesnt include the wiring) 5 a piece 1 set of door hinges 8/set 1 washer bottle and bracket and lid 4 GMC horn cover(aluminum, good shape, no scraches) 10$ Heater control ( 1 broken lever, aluminum face, tight) 20$ Flywheel for SBC except 400. (got lots of metal to it, not turned, new. Has 100miles on it) 50$ / Best offer? hugger orange glove box door( driver quality) 10$ __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

06-28-2004, 11:23 PM	#31
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	I dont have a passenger, but i do have a driver fender. I still have all the parts in the list above. I also have a factory manual tranny, 5 ralley rims that are 6 lug, a gas tank and sender, and other smaller parts. Just ask and you can name your price if its fair. JT __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

04-01-2004, 02:44 AM	#27
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	sent back and bump for you - oops didn't notice clutch was sold. My bad.

06-28-2004, 05:31 PM	#30
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Do you have the passenger fender for a 67?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.